全桥移相关电源设计.doc

摘 要 上世纪60年代开始起步的PWM功率变换技术出现了很大的发展但由于其通常采用调频稳压控制方式，使得软开关的范围受到限制，且其设计复杂，不利于输出滤波器的优化设计。本文介绍了由UC构成的相移式PWM 控制器的工作原理，并在此基础之上进一步设计了由UC构成的全桥移相零电压开关（ZVS）PWM 开关电源。该电路能以隔离方式驱动功率MOSFET，从而提高了电路的稳定性；由于采用了ZVS 技术使电路在高频情况下能够大大减小开关损耗，提高了整个电路的工作效率。 阐述了零电压开关技术(ZVS)在移相全桥变换器电路中的应用。分析了电路原理和各工作模态着重分析了开关管的零电压开通和关断的过程实现条件并且提出了相关的应用领域和今后的发展方向。本文选择了全桥移相控制ZVS-PWM谐振电路拓扑，阐述了零电压开关技术(ZVS)在移相全桥变换器电路中的应用。分析了电路原理和各工作模态零电压开关技术移相控制谐振变换器60s of last century to start the PWM power conversion technology had major development, but because of its frequency regulator control method commonly used to make soft-switching range is limited, and the complexity of its design is not conducive to optimal design of output filter. This article describes the composition of the UC3875 phase shift PWM controller works, and on this basis for further design composed by the UC3875 phase shift full-bridge zero voltage switching (ZVS) PWM switching power supply. To isolate the way the circuit can drive the power MOSFET, thereby enhancing the stability of the circuit; As a result of high-frequency ZVS technology to the circuit in case of switching losses can be greatly reduced, improving the efficiency of the entire circuit.  Zero-voltage switching technology described (ZVS) phase shifted full bridge converter in the circuit application. Analysis of the circuit and the working mode. Analyzes the zero-voltage switch turn on and off conditions of the process of implementation. And put forward the relevant application areas and future development direction. This selected phase shift control full bridge ZVS-PWM resonant circuit topology, zero voltage switching technology described (ZVS) phase shifted full bridge converter in the circuit application. Analysis of the circuit and the working mode.  Key words: zero-voltage switching technology， full-bridge phase-shifting control，resonant converter  目 录 摘 要 1 Abstract 2 第一章 引言 4 1.1开关电源简介 4 1.2开关电源的发展动向 4 1.3本设计的主要内容 5 第二章 相关电力电子器件介绍 6 2.1 二极管 6 2.2双极型晶体管 7 2.3光电三极管 8 2.4场