平煤二矿1.8 Mta新井设计浅析巷旁充填技术研究与应用.doc

中 国 矿 业 大 学 本科生毕业设计 姓 名： 学 号： 学 院： 矿业工程学院 专 业： 采矿工程 设计题目： 矿 Mt/a新井设计 专 题： 指导教师： 职 称： 2012年6月 徐州 Based on the geological conditions of the mine, I bring forward four available project in technology. The first is vertical shaft development with one mining levels, the deep extension of blind slope; the second is vertical shaft development with two mining levels; the third is vertical shaft development with one mining levels and the deep extension of blind slope,and the last is slope shaft development with two mining levels. The four project is the best comparing with other three projects in technology and economy. The first mining level is -430m. The mine field is divided into four strip districts and one mining district. Taking into account the long distance in the east and west direction, The type of mine ventilation is the centralized juxtapose ventilation. Designed first mining district makes use of the method of the mining district preparation. The design length of working face is 200 m, which uses fully mechanized mining with full-seam mining technology. The working days in one year are 330. Everyday it takes 16 hours in lifting the coal. The operation mode in the mine is “four-six” with three teams mining and the other overhauling. Every mining team makes three working cycle, and the overhauling team makes one working cycle. So everyday there are 6 working cycles. The advance of a working cycle is 0.6 m, and the quantity of 5402.7 ton coal is maked everyday. Special subject part of topics is: Analysis the study and applicatioon of roadside packing technology. The translated academic paper is: Geotechnical considerations in mine backfilling in Australia. Keywords:new mine design;vertical shaft;one mining levels of slope; strip district; centralized juxtapose ventilation. 目 录 一般设计部分 1 矿区概述及井田地质特征 1 1.1矿区概述 1 1.2 2 1.3煤层特征 7 2 井田境界与储量 14 2.