大工秋《水电站建筑物》.docVIP

大工13秋《水电站建筑物》 Great worker, 13 autumn, building of hydropower station, online test, 2 I. judgment questions 1. the gate is located on the upstream side of the work gate, and the gate and its gate shall be checked and used to stop water. It is required to open and close in still water when it is used. A. error B. correct The correct answer: B 2. hydraulic calculation of pressure tunnels include two kinds of steady flow and unsteady flow calculation. A. error B. correct The correct answer: B 3. the pressure front tank is set at the end of the diversion channel or the non pressure tunnel. It is the connecting structure between the water diversion station and the pressure pipe. A. error B. correct The correct answer: B 4. non pressure intake is suitable for water intake from natural river or reservoir with little change of water level. Its main feature is deep water and no pressure flow. A. error B. correct The correct answer: A 5. the choice of water diversion route in the diversion tunnel requires the tunnel to be the shortest on the plane, and the depth of burial on the face is required to be shallower. A. error B. correct The correct answer: A 6. in the layout of the penstocks, when the factory and the room longitudinal joints, and the water inlet pressure piping in the dam body in every section of the central government, so that the thickness of concrete pipes on both sides of the same, the uniform stress. A. error B. correct The correct answer: B 7. the selection of the pressure piping route shall meet the safety requirements of the operation. The layout of the pipe shall be arranged on the ridge to prevent the landslide or falling stones from damaging. A. error B. correct The correct answer: B The function of the 8. piers is to fix the steel tube with self weight, and to bear the axial unbalance force caused by the change of the direction and diameter of the steel pipe. A. error B. correct The correct answer: A 9. the force acting on the steel pipe and the pier s