书本翻页动画.docxVIP

This Tutorial would teach you, how to turn a page in Maya, using Mayas skeleton setup. 1. In the Top view, create a default Nurbs Plane with TranslateX=2, ScaleX=4, ScaleY=4, ScaleZ=6, PatchesU=10, and PatchesV=10. (Image1.jpg). ???? ????? Image1.jpg 2. Draw default nine Skeleton Joints as in Image2.jpg. ???? ????? Image2.jpg 3. Select joint1 and Shift select the nurbsPlane2 and Smooth Bind. 4. Set a key for joint1 on RotateZ at Frame1=0 and frame100=180(Image3.jpg). ???? ????? Image3.jpg 5. Set keys for the rest of the joints as in Table.jpg. All keys should be applied to RotateZ. You can turn on Auto Keyframe Toggle for automatic key settings, while you change the values. ???? ????? Table.jpg 6. Now your viewport should resemble Image4.jpg. ???? ????? Image4.jpg 7. You can notice one problem on the animation. See Image5.jpg marked with red. The object should not leave the center point, as the paper would be hinged on the corner. To solve this, we can use Paint Skin Weights Tool. ???? ????? Image5.jpg 8. Select the nurbsPlane1 and open Paint Skin Weight Tool (Image6.jpg). ???? ????? Image6.jpg 9. Select joint1 from the Influence list and Add weights as in Image7.jpg. ???? ????? Image7.jpg Next smooth the weights 4 to 5 times (Image8.jpg) ???? ????? Image8.jpg 10. Now, play some frames and by now the problem should have solved (Image9.jpg). ???? ????? Image9.jpg 11. You can flatten all the keys in the graph editor For multiple pages to turn - select nurbsPlane1 and duplicate with Duplicate Input Graph turn ON. Then, move the keys for all the newly duplicated joints around 60 to 80 frames forward. ?? You can download the completed scene file  HYPERLINK /tutorialimages/266/PageTurnAnimation.rar PageTurnAnimation.rar. If you have knowledge, let others light their candles with it. -Winston Churchil Author: Prashanth VSWebsite:  HYPERLINK / Suggestions and feedbacks can be mailed to  HYPERLINK mailto:maya@ maya@