On the anaysis f cracks in cncrete strctres an cntr f 文档.doc

On the analysis of cracks in concrete structures and control of   Abstract: The construction of concrete cracks easily analyze the causes, and from the angle of cracks in the construction control measures. 牋牋牋牋 Keywords: concrete; cracks; analysis; control; restriction standard 牋牋牋牋 Concrete engineering properties of the materials determines the structure, cracks easily, from the practical view of the cracks in concrete construction is a big probability that a considerable number of cracks on the building by force and normal use without too much harm, but the The existence of cracks will affect the integrity of the building, durability, will produce steel corrosion, is subject to forces be used for the stress concentration risks, it should be given attention in all aspects as far as possible in order to avoid the appearance of cracks or to crack license control within the scope. 牋牋牋牋 A high-rise building construction in the analysis of several special parts of the cracks 牋牋牋牋 1.1 The mass-based concrete slab 牋牋牋牋 High-rise buildings with increased height in the basement that got deeper, bottom is getting thick, the thickness of the floor has been commonplace for more than 3m. High-rise building foundation slab as a major force structure, the overall high demand as a whole in general a one-time casting. Practice has proved that a large number of at home and abroad, all kinds of cracks in mass concrete is mainly caused by temperature changes. Mass concrete pouring stage after the temperature are large, concentrated in the internal heat of hydration of cement is not easy distribution, concrete, the internal temperature will be significantly increased, so that internally generated compressive stress in the concrete, the outer surface of tensile stress, due to the concrete at this time low intensity, there is likely to lead to the surface cracks. In the cooling stage, and new poured concrete shrinkage due to the presence of the