仪表信电缆类.docVIP

PAGE 2 PAGE 3 仪表信号电缆类 INSTRUMENTAL SINGAL CABLE 电动型仪表信号电缆 Electromotive Instrumental signal Cable 产品特点及用途 该产品其组成为绝缘线芯以两根绞合成对或三根绞合成组，然后再由线对或线组成缆，电缆有总屏蔽。 用于电动仪表为主的电动控制系统及计算机控制系统。该电缆可用作传输生产装置过程变量的检测、控制、联锁、报警、指示等模拟和数字信号。 Ⅰ. Characteristics and Application The products insulated cores are twisted in pair or stranded in banks of three threads. These pairs or banks are then cabled, with general shield. It is used in electromotive instrument of automatic control system and computer control system, transmitting various analogue and digital signals of testing, controlling, interlocking, alarm in production process. 产品执行标准 企业标准 等效采用英国BS5308标准 Ⅱ. Implemented standard Enterprise standard Standard equivalent to British BS5308 使用特性 交流额定电压U0/U：300/500V 电缆最高工作温度：聚乙烯绝缘 70 交联聚乙烯绝缘 90 无卤低烟阻燃聚烯烃 70 辐照交联型 90℃和125 最低环境温度：固定敷设 -40℃；非固定敷设 -15 安装敷设温度：不低于0 电缆允许最小弯曲半径：非铠装、联锁或编织铠装电缆不小于电缆外径的6倍 铜带屏蔽或钢丝、钢带缠绕铠装电缆不小于电缆外径的12倍 Ⅲ. Application characteristics 1. Rated AC Voltage U0/U: 300/500V 2. The highest operating temperature of cores: PE insulation: 70 Cross linked-polyethylene: 90 Halogen-free and low smoke flame-proof polyolefin: 70 Radiation cross-linked polyethylene: 90℃ or 125 3. The lowest environment temperature: Fixed deploying -40℃; Non-Fixed deploying -15 4. Mounting deploying temperature: Not under 0 5. Permitted minimum bending radius: Not smaller than 6 times the outer diameter for non-armoured, interlock or braid armoured cable and 12 times the outer diameter for copper tape shielded or steel wire winding, steel tape wrapping armoured cable. 主要技术指标 Ⅳ. Main technical parameters 性能项目 Property Item 单位 Unit 指标 Indicator 导体线芯直流电阻(20℃ resistance o