机械工程英语_翻_译.pptVIP

1. Higher hardness than that of the workpiece material being machined, so that it can penetrate into the work material. 2. Hot hardness, which is the ability of the material to retain its hardness at elevated temperatures in view of the high temperatures existing in the cutting zone. 1. 硬度要比被切削工件材料高，这样它才能进入工件材料。 2. 热硬度，即材料由于存在于切削区的高温而升温时仍能保持其硬度的能力。 3. Wear resistance—The chip-tool and chip-work interfaces are exposed to such severe conditions that adhesive and abrasion wear is very common. The cutting tool material should therefore have high abrasion resistan