三相逆变器波形控制技术研究-电力电子与电力传动专业论文.docxVIP

华中科技 大学硕士学位论 华 中 科 技 大 学 硕 士 学 位 论 文 II万方数据 II 万方数据 一步得出了一种只考虑稳态情况下基波补偿的输出电流比例前馈控制策略。最后，通 过仿真验证了该控制策略在有效抑制输出电流对输出电压波形影响的同时，也提高了 系统的动态特性。 关键词：组合式三相 PWM 逆变器；频率特性测试；重复控制；复合控制方案； 电流前馈控制 PAGE IV万方数据 PAGE IV 万方数据 Abstract With the rapid development of power electronics technology, the inverter is widely applied in the fields of medical, industrial, transportation, military, bank and so on. The inverter guarantees the normal operation of the electronic device, while it can also output high-quality power to ensure the technical and economic characteristics of electrical equipment. Inverter applications can be divided into: AC stabilized power supply, power transmission and power inverter, power system applications and new energy supply system. In the application of AC stabilized power supply, the waveform control technology has been one of the hottest researches. In this paper, with a 100kVA combined three-phase inverter as a research object, research on the waveform control of three-phase inverter technology was carried out. This paper mainly study the composite control strategy of PI control plus repetitive control and feedforward control of output current. This paper focuses on the establishment of a mathematical model of PWM inverter, design of the repetitive controller, Composite Control strategy and the output current feedforward controller. Firstly, this thesis introduced two different types of main circuit topologies of the three-phase PWM inverter, which were compared from the three aspects of power levels, control methods and conditions. Then a circuit model of single-phase PWM inverter was established. After that, mathematical models in different coordinate systems of combined three-phase inverter were established. These models were continuous-time state space model, the transfer function model and the block diagram model. Finally the frequency characteristics test of the plant was taken to determine the equivalent resistance of the circuit model of the inverte