汽车变速上盖组合机床设计_毕业论文.docVIP

20XX届本科生毕业论文 学号： 加工汽车变速器上盖组合机床设计 院 系： 机电工程学院 专 业： 机械设计制造及其自动化 姓 名： 指导教师： 二0一X年X月  毕业论文诚信声明 本人郑重声明： 所呈交的毕业论文《加工汽车变速器上盖组合机床设计》是本人在指导老师的指导下，独立研究、写作的成果。论文中所引用是他人的无论以何种方式发布的文字、研究成果，均在论文中以明确方式明。 本声明的法律结果由本人独自承担。 作者签名： 年 月 日  摘 要 加工汽车变速器上盖组合机床是以通用部件为基础，配以按汽车变速器上盖外形和加工工艺设计的专用部件和夹具，组成的半自动或自动专用机床。组合机床一般采用多轴、多刀、多工序、多面或多工位同时加工方式，生产效率比通用机床高几倍至几十倍。由于通用部件已经标准化和系列化，根据需要灵活配置，能缩短设计和制造周期。该组合机床兼有低成本和高效率的优点，在大批、大量生产中的广泛应用，并可用以组成自动生产线。该组合机床用于加工汽车变速器上盖零件。加工时，工件一般不旋转，出刀具的旋转运动和刀具与工件的相对进给运动，来实现钻孔、扩孔、锪孔、铰孔、镗孔、铣削平面、切削内外螺纹以及加工外圆和端面等。 【关键词】 汽车变速器上盖 组合机床 工艺设计  Abstract Processing the Automotive Transmission superstructure combination of machine tools based on common components based, together with the parts and fixtures for automobile transmission cover appearance design and processing technology, consisting of semi-automatic or automatic special purpose machine. Combined machine tool commonly used multi-axis, multi-tool, multi-process, multi-faceted or multi-station processing methods, production efficiency several times higher than the general machine to several times. Common components have been standardized and serialized, can be flexibly configured to shorten the design and manufacturing cycle. The combination of machine tool combines the advantages of low cost and high efficiency in large numbers, the mass production of a wide range of applications and can be used to form an automatic production line. The combination of machine tools for processing automotive transmission superstructure parts. When machining the workpiece is generally not rotated, the rotational movement of the tool and the tool and the workpiece relative feed movement to achieve drilling, reaming, countersinking holes, reaming, boring, milling plane, cut internal and external threads, and machining cylindric