层2交换技术ppt课件.ppt

  1. 1、本文档共22页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
层2交换技术ppt课件

Slide 3 of 3 Purpose: Emphasize: Note: 64 bytes is the minimum ethernet frame size. The command to switch the mode on the 1900 is: wg_sw_a(config)#switching-mode ? fragment-free Fragment Free mode store-and-forward Store-and-Forward mode Slide 1 of 1 Purpose: Emphasize: Layer 2 has no mechanism (like a TTL) to stop loops. Slide 1 of 3 Purpose: Emphasize: Broadcast frames are flooded. Slide 2 of 3 Purpose: Emphasize: Slide 3 of 3 Purpose: Emphasize: Layer 2 has no TTL mechanism to stop looping frames. Slide 1 of 1 Purpose: Emphasize: A looped topology is often desired to provide redundancy, but looped traffic is undesirable. The Spanning Tree protocol was originally designed for bridges. Today, it is also applied to LAN switches and routers operating as a bridge. STP ensures all bridged segments are reachable but any points where loops occur will be blocked. Slide 1 of 1 Purpose: Emphasize: The three general rules when dealing with STP: 1. One root bridge per network. The root is the bridge with the lowest Bridge ID. All the ports on the root bridge are designated ports (forwarding). 2. For every non root bridge, there is a root port (forwarding). The root port is the port with the lowest accumulated path cost to the root bridge. 3. For every segment, there is only one designated port. The designated port forwards traffic for the segment. The designated port has the lowest accumulated path cost to the root bridge. ? 2002,张羿 Z_arthur@ ICND+HCNE—1-* 行业处理客户投诉的技巧课件神经内科医疗质量及管理规范神经疾病病情观察及能力培养社区老年痴呆的全科诊疗身边的侵害和保护少先队礼仪文化知识培训 ?2002. 张羿 1-* 行业处理客户投诉的技巧课件神经内科医疗质量及管理规范神经疾病病情观察及能力培养社区老年痴呆的全科诊疗身边的侵害和保护少先队礼仪文化知识培训 第十一章 层2交换技术 地址学习 帧的转发/过滤 环路防止 交换机的三个功能 交换机如何学习主机的位置 MAC地址表 0260.8c01.1111 0260.8c01.2222 0260.8c01.3333 0260.8c01.4444 E0 E1 E2 E3 A B C D 交换机如何学习主机的位置 主机A发送数据帧给主机C 交换机通过学习数据帧的源MAC地址,记录下主机A的MAC地址 对应端口E0 该数据帧转发到除端口E0以外的其它所有端口 (不清楚目标主机的单点传送用泛洪方式) 0260.8c01.1111 0260.8c01.2222 0260.8c01.3333 0260.8c01.4444 E0: 0260.8c01.1111 E0 E1 E

文档评论(0)

gz2018gz + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档