毕业设计外文翻译-4H-2型花生收获的设计原理及运动特性分析.docVIP

Design principle and analyses of the motion characteristics of 4H-2 type peanut harvester Abstract The structure, working principle and design of main parts of the 4H-2 type peanut harvester were described and analyzed, and the kinematics model of the main work parts was founded. On the basis of the optimized structure, the representative tracks of the work parts were described by means of Visual Basic and SPSS software and the machine function characteristics. The theoretical foundation has been provided for further study of this kind of machines. Key words: Peanut harvester; design principle; motion characteristics Biography: Shang Shuqi(1958-), born in Qingzhou City, Shandong Province, Professor, Head of Engineering School of Laiyang Agricultural University, Shandong Province 265200, China. Majored in design and performance test of agricultural machinery. Email:sqshang@lyac.edu.cn 1　Introduction 　The peanut is one of the main oil plants in the world, which is only inferior to soybean but ranks the second for oil production and international trade[1,2]. For a long time, the planting, harvesting and processing of peanut were mostly completed by manual work. It is a piece of labored work with low efficiency, which affects the peanut production seriously. Especially in the last few years, as the transferring surplus rural labors to urban areas, the contradiction of each link of peanut production is more intensifying, the mechanization of the peanut production becomes particularly important. 　It has been a long time for researching and developing the peanut harvesters in developed countries, it is a typical representative that the LP-2 type peanut harvester and peanut combine harvester of Courtesy lf Lilli ston Mfg. Co. in the United States and PH-2 type peanut harvester of Michigan in Netherlands[3]. The development of peanut harvester in China is later than that in developed countries, perhaps the beginning of the 1960s. Since the 1970s, many representative mimic pe