1006印尼LABUAN一次风机调试程序EN(090323).docVIP

Commissioning Procedure for Primary Air Fan SystemPage: 1 of 17E07007Document Class1CHENGDA ENGINEERING CORPORATION OF CHINACHENGDA JOB NO. E07007AFor approvalRev.DescriptionDatePreparedCheckedReviewedApprovedPT. PLN (PERSERO)OWNER’SDWG. NO. PT. PLN (PERSERO)JASA SERTIFIKASI (LMK)Client’s Project No.PLTU 2 BANTEN-LABUAN (2x300MW)Labuan, Banten, the RepublicDWG. NO.E07007-PR-TM-1006Electronic File Name:Date of Issue:Revision No.AThis document is restricted. Neither he whole nor any part of this document may be disclosed to any third party without the prior written consent of Chengda Engineering Corporation of China, in which the copyright of this document is vested. All copyrights reserved. Neither the whole nor any part of this document may be reproduced, stored in any retrieval system or transmitted in any form or by any means (electronic, mechanical, reprographic, recording or otherwise) without the prior consent of the copyright owner.Commissioning Procedure for Primary Air Fan SystemPage PAGE 17 of 17PurposeThe purpose of this document is to establish the commissioning procedure for PAF body and its system. Inspect and adjust the PAF body、motor、piping and its accessories, and make sure that the running performance of the equipments is normal, control and protection is correct, so that it can satisfy the requirements of running.Reference documentDrawing NO：F289S-J0201B-02、F289S-K0201B-04InstrumentPocketable vibration meter: vm-63a; Infrared thermometer: Raytek PM Plus; Digital tachometer: EMT260B; DCS and Local meters for other parameters.Safety precautions (1) Before the commissioning, the principal must instruct all testers to understand the purpose、require、procedure、danger and safety measure of the commissioning, and all testers should know their duty. (2) When coming into construction locale, notice alert mark; prohibit going to ineligible walkway, dangerous work place and non-lighting place.(3) Before the commissioni