机械毕业设计（文）-螺母加工工艺铣槽夹具设计（全套图纸）.docVIP

PAGE 13常州机电职业技术学院毕业设计（论文）说明书作 者： 学 号： 系 部： 专 业： 题 目： 螺母加工工艺及夹具设计 指导者：评阅者： 年 月 毕业设计（论文）中文摘要本设计是基于螺母零件的加工工艺规程及一些工序的专用夹具设计。螺母零件的主要加工表面是外圆及孔系。一般来说，保证平面的加工精度要比保证孔系的加工精度容易。因此，本设计遵循先面后槽的原则。并将孔与平面的加工明确划分成粗加工和精加工阶段以保证孔系加工精度。主要加工工序安排是先以支承孔系定位加工出顶平面，在后续工序中除个别工序外均用顶平面和工艺孔定位加工其他孔系与平面。夹具选用专用夹具，夹紧方式多选用手动夹紧，夹紧可靠，机构可以不必自锁。因此生产效率较高。适用于大批量、流水线上加工。能够满足设计要求。关键词：螺母类零件；工艺；夹具全套图纸，加153893706 PAGE I毕业设计（论文）外文摘要Title： The long shaft fork processing technology and fixture design Abstract：This design is the special fixture for machining process for long shaft parts and process design based on. The main processing surface of long shaft parts is cylindrical and holes. In general, ensure the machining accuracy of plane than to ensure the accuracy of the processing easily. Therefore, follow the groove surface after the first principle of the design. And the hole and the plane processing clearly divided into roughing and finishing stages to ensure machining precision. The main process of machining technology is first to support hole positioning processing the top plane, in addition to the follow-up processes are individual processes with the top plane positioning technology and other processing Kong and plane. The special fixture fixture, clamping means more choice of manual clamping, clamping reliable, agencies can not self-locking. Therefore, higher production efficiency. Suitable for large batch, the processing pipeline. Can meet the design requirements.Keywords：long shaft, processing, special fixture, design PAGE 12目 录 TOC \o 1-3 \u 1 加工工艺规程设计 PAGEREF _Toc385624880 \h 31.1 零件的分析 PAGEREF _Toc385624881 \h 31.1.1 零件的作用 PAGEREF _Toc385624882 \h 31.1.2 零件的工艺分析 PAGEREF _Toc385624883 \h 31.2 螺母加工的主要问题和工艺过程设计所应采取的相应措施 PAGEREF _Toc385624884 \h 31.3 螺母加工定位基准的选择 PAGEREF _Toc385624885 \h 41.3.1 粗基准的选择 PAGEREF _