毕业设计（论文）-轨道压力测量系统设计（套图纸）.docVIP

本科毕业设计(论文)题目：轨道压力测试系统的设计 院 系： 机械工程学院 专 业： 机械设计制造及其自动化 学 号： 姓 名： 指导教师： 2016年3月 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT I摘 要轨道电路是信号联锁的室外重要设备，起着保证行车和调车作业安全的作用。它能监督检车某一固定区段内的线路是否有列车运行、调车作业或车辆占用的情况，并能显示该区段内的钢轨是否完整。它是以钢轨为导线，轨缝简用接续线连续起来，一端接电源，另一端连接受电器，通过轨道电流来工作。本文将以单片机为核心设计了轨道压力测试系统的结构图、程序指令、流程图等等，在保留了原始轨道压力测试系统的基本功能的同时又增加了一系列的实用功能并简化其电路结构，其将以控制方便，灵活，只要改变输入单片机的控制程序，便可以控制轨道压力测试系统，方便，简洁。关键词 单片机控制系统 可靠性 系统 全套图纸，加153893706 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT IVAbstract The track circuit is an important equipment of outdoor signal interlocking system, and plays to ensure traffic safety of shunting operation function. It can within the supervision and inspection of a fixed section line whether occupied by the train operation and shunting operation or vehicle, and can display the section of the rail is complete. The rail is a conducting wire, and the rail joint is continuously connected with a continuous line, one end is connected with a power supply, and the other end is connected with the electric appliance. The single-chip microcomputer as the core design of rail pressure test system structure diagram, program instructions, flow charts, and so on, while retaining the original rail pressure test system the basic function and added a series of practical function and simplify the circuit structure, it will to facilitate the control, flexible, as long as the change in the input of the MCU control procedures, they can control rail pressure testing system is convenient.Keywords Singlechip microcomputer Forging machine 目 录摘要 IAbstract II HYPERLINK file:///C:\\wfpaper\\y5663840001.pdf \t mainFrame 1绪论 1 HYPERLINK file:///C:\\wfpaper\\y5663840001.pdf \t mainFrame 1.1课题的研究背景和历史意义 1 HYPERLINK file:///C:\\wfpaper\\y5663840001.pdf \t mainFrame 1.2轨道压力测试系统的功能 2