毕业设计（论文）-数字电子表外壳塑料模具计（全套图纸）.docVIP

PAGE 60 毕业设计说明书(论文)题 目： 数字电子表外壳塑料模具设计 全套图纸加153893706摘要本文首先分析了塑料模具的发展趋势，重点介绍了外侧抽芯结构和内侧抽芯机构。然后分析数字电子表壳塑件的结构特点，介绍了电子表壳体注射模结构的设计方法、尺寸要求及模具的工作过程，以及模具设计的具体步骤和过程，CAD在模具设计中的运用大大提高了我们的设计效率，可以在一定程度上使我们摆脱了一些繁琐的绘图与计算工作，更专注于整体的设计。并且对各个设计过程做了必要的理论说明,分析和阐述了模具零件的选材、强度和刚度的校核，电子表外壳的外侧孔采用斜导柱和斜滑块抽芯的设计方法，内凹坑采用三块式内侧抽芯机构，以及脱模机构和冷却系统的设计。关键词 数字电子表外壳，注塑模，外侧抽芯，内侧抽芯 AbstractThis text has analyzed the development trend of the plastic mould at first, focused on the outer core-pulling and medial core-pulling. Then analyzed the features of digital electronic watch shell plastic, introduced the design method of injection mould structure ,dimensional requirement and the work process of the molding together with concrete steps and processes of mould design. The application of CAD in the mold design has greatly increased the efficiency of our design, to some extent, can make us get rid of some complicated drawing and calculation work, focus on the overall design.This text also showed all the processes of mould design and made necessary theory instruction for every design process, analyzed and elaborated the selecting material for mould parts and the calculation of strength ang stiffness. The design method of the outside hole adopted guide pin and slide taking out core, the inside hole adopted 3-type core-pulling mechanism, and showed the design of demoulding mechanism and cooling system.Key words Digital electronic watch shell, Injection mould, Outer core-pulling, Medial core-pulling目录 TOC \u \t 标题,1,副标题,2 前言 PAGEREF _Toc418077765 \h 11 塑料模具行业的概述 PAGEREF _Toc418077766 \h 12 模具行业的发展现状及其发展趋势 PAGEREF _Toc418077767 \h 13 侧抽芯机构的的应用 PAGEREF _Toc418077768 \h 2第1章 塑件分析 PAGEREF _Toc418077769 \h 51.1 塑件的结构 PAGEREF _Toc418077770 \h 51.2 工艺分析和尺寸精度 PAGEREF _Toc418077771 \h 61.3 塑件材料成型特性及工艺参数 PAGEREF _Toc418077772 \h 7第2章 设备的选择 PAGEREF _Toc418077773 \h 92.1 塑件体积的计算 PAGEREF _Toc418077774 \h 92.2 注射机的选用 PAGEREF _Toc418077775 \h 9第3章 分型面的选择 PAGEREF _Toc418077776 \h 11第4章 浇注系统的设计 PAGE