51单片机利用串口接GPS信号并液晶显示C语言.docVIP

#include reg52.h //89C52单片机头文件#include LCD_code.h //液晶LCD的字模文件#include intrins.h //功能引脚定义sbit A = P0^7; //数据1/命令0选择sbit RW = P0^6; //读1/写0sbit E1 = P0^4; //片选1(Master)sbit E2 = P0^5; //片选2(slave)sbit LED= P0^3; //背光 sbit up = P0^0; //向上翻页键 sbit down= P0^1; //向下翻页键#define data P2 //液晶并行数据//液晶显示控制命令表#define disp_on 0xAf //显示关闭#define disp_off 0xAe //显示打开#define disp_start_line 0xC0 //显示起始地址（后5位-表示0-31行）#define page_addr_set 0xB8 //页地址设置(0~3)#define col_addr_set 0x00 //列地址设置(0~61)#define status_busy 0x80 //0＝ready#define modeRWite 0xEE //写模式#define dynamic_driver 0xA