端部设肋方钢管混凝土框架抗震性能分析.docVIP

端部设肋方钢管混凝土框架柱抗震性能分析 　　摘要：提出了一种端部设肋方钢管混凝土框架柱，采取在柱端部区域设置纵向加劲肋的方式避免端部过早地发生局部屈曲，以提高其承载力，改善延性和抗震性能.采用通用非线性有限元软件MSC.Marc建立壳实体精细有限元分析模型对已有试验进行了非线性有限元分析，有限元分析结果与试验结果吻合良好.在验证了有限元模型合理性的基础上，分析了不同参数条件下端部设肋方钢管混凝土框架柱的力学性能.研究表明，端部加劲肋能够延缓钢管壁的鼓曲，提高柱的承载力，显著改善柱的延性和抗震性能.端部加劲肋的设置长度以柱的1～2倍边长为宜，高度和厚度应满足一定的构造要求，可以通过增大加劲肋的厚度或增加每边加劲肋的设置数量来提高柱的承载力，且后者效果更好. 中国论文网 /4/viewhtm　　关键词：方钢管混凝土框架柱；端部设肋；有限元；抗震分析；延性 　　中图分类号：TU398 文献标识码：A 　　Abstract：A square concretefilled steel tube frame column with end ribs was put forward. The end longitudinal rib was used to avoid the premature local buckling of steel tube wall and then to improve the load carrying capacity， ductility and seismic performance of concretefilled steel tube. Refined nonlinear finite element （FE） models were established by using MSC.Marc to study the existing experiments， and the results from the FE models fit well with the test data. Based on the reasonability of the FE models， parametric analyses were carried out to further explore the behavior of the square concretefilled steel tube frame column with end ribs. The analyses have shown that the end ribs can delay the local buckling of the steel tube and improve the load carrying capacity， ductility and seismic performance. The length of the end ribs are to be set at 1～2 times the sectional side length from the column end， and the height and thickness of the end ribs should satisfy certain structural requirements. The increase of the thickness of the end ribs or the number of end ribs on each side can improve the load carrying of the column， and the latter is better. 　　Key words：square concretefilled steel tube frame column； end ribs； finite element； seismic analysis； ductility 　　钢管混凝土结构充分发挥了混凝土和钢材的优点，弥补了各自的缺点，具有承载力高、塑性和韧性好、施工方便、耐火性能和经济效果好等优点[1-3].方钢管混凝土结构同时还具有建筑布局灵活、节点形式简单等优点，是发展前景广阔的一种结构形式[4-6]. 　　已有的试验研究发现，方钢管混凝土框架柱中钢管的宽厚比若超过一定的限值时，在荷载的作用下钢管壁端部较易产生向外的局部鼓曲，降低构件的承载能力及延性[7].为了延缓方钢管混凝土框架柱的端部鼓曲，改善构件的延性和抗震性能，国内外学者已展开相关的试验和理论研究.吕西林[8]等进行了9个设置栓钉的方钢管混凝土柱低周反复试验；张耀春[9]等进行了9根带肋薄壁方钢管混凝土柱