MPO MTP分支扇出光缆.docVIP

GigaC? MPO / MTP 分支扇出光缆概述GigaC? MPO / MTP 分支扇出光缆是利用高密度多芯光缆和MPO / MTP连接器，通过中间分支器结构实现从MPO / MTP转接分支到LC, SC, FC, ST, MTRJ等普通连接器上。可选用各种规格的4~48芯单模和多模光缆，如普通G652D / G657A1 / G657A2单模光缆，多模62.5/125, 10G OM2 / OM3 / OM4，或者抗弯高性能的10G多模光缆等。 优势高质量的制程及测试保证高密度应用，节省布线空间具备最优光网络性能最优的数据中心布线解决方案应用特点连接主干缆输出端到配线架系统可选用8/12/24芯MPO / MTP连接器分支连接头为LC, SC, ST, E2000, MTRJ, Mini-LC，且可以选用分出单联或双联形式。有圆形、方形或定制的分支器结构，配合各种长度的0.9/2.0/3.0mm扇形分支缆符合Telcordia GR-1435-CORE, GR-2866-CORE, GR-326-CORE, RoHS.应用工作站间预接端桥接线高密度光纤线路管理数据中心局域网/广域网用户端性能参数MPO / MTP 连接器:TypeSingle-mode (APC polish)Single-mode (PC polish)Multi-mode (PC polish)Fiber count4,8,12, 24 , etc.4,8,12, 24, etc.4,8,12, 24, etc.Fiber typeG652D,G657A1, etc.G652D,G657A1, etc.62.5/125,OM2,OM3,OM4, etc.Maximum Insertion LossElite / Low LossStandardElite / Low LossStandardElite / Low LossStandard≤0.35 dB 0.25 dB Typical≤0.70 dB0.5 dB Typical≤0.35 dB0.25 dB Typical≤0.70 dB0.5 dB Typical≤0.35 dB0.2 dB Typical≤0.5 dB0.35 dB TypicalReturn Loss≥55 dB≥45 dB≥20 dBDurability≥200 times≥200 times≥200 timesTest Wavelength1310nm / 1550nm1310nm / 1550nm850nm / 1300nm普通单芯连接器：TypeTypeSingle-mode (APC polish)Single-mode (UPC polish)Multi-mode (UPC polish)Fiber typeG652D,G657A1, etc.G652D,G657A1, etc.62.5/125,OM2,OM3,OM4, etc.Maximum Insertion LossLow LossStandardLow LossStandardLow LossStandard≤0.1 dB ≤0.30 dB≤0.1 dB ≤0.30 dB≤0.1 dB ≤0.30 dB0.05 dB Typical0.25 dB Typical0.05 dB Typical0.25 dB Typical0.05 dB Typical0.25 dB TypicalReturn Loss≥60 dB≥50 dB≥25 dBDurability≥500 times≥500 times≥500 timesTest Wavelength1310nm / 1550nm1310nm / 1550nm850nm / 1300nm备注: 所有MPO/MTP多芯光缆跳线组件的极性关系可选为平行式(A-to-A, B-to-B)，交叉式 (A-to-B, B-to-A)，或者成对交叉式。光缆结构12色250um着色光纤12色250um着色光纤凯夫拉加强筋光缆外皮250um250um带状12色裸光纤带带状光缆外皮带状光缆外皮250um带状12色裸光纤带凯夫拉加强筋分支空管结构空管外皮空管外皮凯夫拉加强筋0.9着色空管组装图订单信息⑴ TYPE: GigaC? MPO/MTP Harness⑵ INSERTION LOSS TYPE: 0=Standard, 1=Elite / Low Loss FIBER COUNT: 04=4-fiber, 08=8-fiber, 12=12-fiber, 24=24-fiber,etc. MTP/MPO CONNECTOR TYPE: M=Male (with pins), F=Female (no pins)⑶ F