初二物理——《欧姆定律的应用》之多种办法测小灯泡电阻(无图填空版.docVIP

初二物理——《欧姆定律的应用》之多种办法测小灯泡电阻(无图填空版...In this paper, by Cat_ small K ╭ ァ contributionDoc documents may have a poor browsing experience at the WAP end. It is recommended that you choose TXT, or download the source file to the native view.Many kinds of way to measure resistance, voltammetry measuring resistance 1, fixed value resistance measurement experiment principle: laboratory equipment: power supply, voltmeter, ammeter, the resistance under test, the slide rheostat, switches, wire circuit diagram:Experimental steps: (1) disconnect switch, according to the circuit diagram, connect the physical, dispatch slide rheostat value to maximize (2) closed switch, adjust the position of the slide rheostat sliding vane, observe the voltmeter and ammeter readings, records for U1, I1 (3) change the position of the slide rheostat sliding vane, observe the voltmeter and ammeter readings, record for U2, I2, (4) repeat steps 3 to 5 times, and will fill in the form of (5) according to the measured data R = U/I calculate each measured resistance R1, R2,... R3, the average of resistance (or use map like to process the data) 6 analysis data, finishing equipment Lets image as an example to process the data analysis: the origin of the image is a fixed value resistors of straight line, its resistance value is a constant.Conclusion: this is a fixed value resistor, and the resistance value is... 2, small bulb resistance measurement principle, experimental equipment, power supply, voltmeter, ammeter, small bulb, slide rheostat, switches, wire circuit diagram:Experimental steps: (1) disconnect switch, according to the circuit diagram, connect the physical, dispatch slide rheostat value to maximize (2) closed switch, adjust the position of the slide rheostat sliding vane, observe the voltmeter and ammeter readings, record for U1, (3) change the position of the slide rheostat sliding vane, observe the voltmeter and ammeter readings, record for U2, I2, (4) repeat steps 3. 6 times, and will fill in