年产3000吨农药乳化剂三氧化硫合成工段初步设计论文.docVIP

齐 齐 哈 尔 大 学毕业设计(论文) 题 目 年产3000吨农药乳化剂三氧化硫合成工段初步设计 学 院 化学与化学工程学院 专业班级 化学工程与工艺 化工083 学生姓名  李 祚 辉 指导教师 贾 丽 华 成 绩 年 月 日齐齐哈尔大学毕业设计(论文) - PAGE IV -摘要本设计为年产3000吨农药乳化剂三氧化硫合成工段初步设计；根据设计的要求对选择本工艺的意义和本工艺在国内外发展现状进行了相对论证，做出了工艺流程选择；对整个装置进行了物料衡算和热量衡算，对主要设备进行了详细设计与选型，对其它设备同样做出了概略设计和选型，并制作了相应的设备一览表；根据工艺的需要对本设计的车间平立面布置和自动控制进行了概述；同时对本工艺安全与环境保护和公用工程做了相关的讨论，在此基础初上对本设计进行了经济初步核算；最后根据设计的内容编写了设计说明书，用A1纸手工绘制了带控制点的工艺流程图，采用Auto CAD绘制了车间平立面布置图和主要设备设计图关键词：三氧化硫；物料衡算；热量衡算；工艺流程图；车间布置AbstractThe design for the 3,000 tons of pesticide emulsifier synthetic construction section of the sulfur trioxide preliminary design; Select the significance of this process and the process in accordance with the requirements of the design development in the world relative argument; Making process to select; Material balance and heat balance of the entire device Detailed design and selection of major equipment, other equipment also made ??a rough design and selection, and production of the corresponding equipment list；An overview of the design workshop and facade arrangement and automatic control according to the needs of the process; Process safety and environmental protection and public works related discussion of the design early on the basis of this preliminary economic accounting; Finally, according to the design of the content of the preparation of design specifications, paper of A1 by hand drawing a process flow diagram with control points, use Auto CAD drawing workshop and facade layout and the design of major equipment.Key words：Sulfur trioxide; material balance; heat balance; flow chart; plant layout目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc325380431 摘要 PAGEREF _Toc325380431 \h I HYPERLINK \l _Toc325380432 Abstract PAGEREF _Toc325380432 \h II HYPERLINK \l _Toc325380433 第1章 总论 PAGEREF _Toc325380433