STM基本定时1秒闪烁LED.docVIP

STM32通用定时器的基本定时器功能实现灯闪烁 /* Includes ------------------------------------------------------------------*/ #include stm32f10x_lib.h ErrorStatus HSEStartUpStatus; void RCC_Configuration(void); //void USART_Configuration(void); void GPIO_Configuration(void); void TIM_Configuration(void); void NVIC_Configuration(void); void delay(void); int main(void) { #ifdef DEBUG debug(); #endif RCC_Configuration(); GPIO_Configuration(); TIM_Configuration(); //USART_Configuration(); NVIC_Configuration(); /* Infinite loop */ while (1) { if (TIM_GetITStatus(TIM2, TIM_IT_Update) != RESET) { } } } /******************************************************************************* * Function Name : assert_failed * Description : Reports the name of the source file and the source line number * where the assert_param error has occurred. * Input : - file: pointer to the source file name * - line: assert_param error line source number * Output : None * Return : None *******************************************************************************/ void RCC_Configuration(void) { /*将外设RCC寄存器重设为缺省值 */ RCC_DeInit(); /*设置外部高速晶振（HSE）*/ RCC_HSEConfig(RCC_HSE_ON); //RCC_HSE_ON——HSE晶振打开(ON) /*等待HSE起振*/ HSEStartUpStatus = RCC_WaitForHSEStartUp(); if(HSEStartUpStatus == SUCCESS) //SUCCESS：HSE晶振稳定且就绪 { /*设置AHB时钟（HCLK）*/ RCC_HCLKConfig(RCC_SYSCLK_Div1); //RCC_SYSCLK_Div1——AHB时钟 = 系统时钟 /* 设置高速AHB时钟（PCLK2）*/ RCC_PCLK2Config(RCC_HCLK_Div1); //RCC_HCLK_Div1——APB2时钟 = HCLK /*设置低速AHB时钟（PCLK1）*/ RCC_PCLK1Config(RCC_HCLK_Div2); //RCC_HCLK_Div2——APB1时钟 = HCLK / 2 /*设置FLASH存储器延时时钟周期数*/ FLASH_SetLatency(FLASH_Latency_2); //FLASH_Latency_2 2延时周期 /*选择FLASH预取指缓存的模式*/ FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable); // 预取指缓存使能 /*设置PLL时钟源及倍频系数*/ RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9); // PLL的输入时钟 = HSE时钟频率；RCC_PLLMul_9——PLL输入时钟x 9