35KV变电所一次部分设计-毕业设计说明书.docVIP

PAGE PAGE 32 本科毕业设计说明书 35KV变电所一次部分设计 THE PRIMARY DESIGN OF 35KV SUBSTATION 学院（部）： 电气与信息工程学院 专业班级： 电气工程######## 学生姓名： ###### 指导教师： ####### 2013年 5月 35KV变电所一次部分设计 摘要 设计内容主要包括主变设计、变压器容量和台数选择、短路电流计算、电气设备选择、配电装置、无功补偿等。设计以实际负荷为依据，以变电所的最佳运行为基础，按照有关规定和规范，完成了满足该企业供电要求的35kV变电所一次部分设计。 设计中先对负荷进行了统计与计算，选出了所需的主变型号，然后根据负荷性质和容量及对供电可靠性要求拟定主接线方案。考虑到短路对系统设备型号选择和整定的影响，设计中进行了短路电流计算。设计中对主要高压电器设备进行了选择与校验，如断路器、隔离开关、电压互感器、电流互感器等。还进行了变电所的配电装置设计，并对低压侧进行无功补偿，提高了整个变电所效率。 关键词：35kV变电站，一次部分设计，电气主接线，配电装置 THE PRIMARY DESIGN OF 35KV SUBSTATION ABSTRACT Design specification content is divided into, including the design of main transformer transformer capacity and the Numbers short circuit current calculation of electrical equipment selection reactive power compensation for distribution equipment etc. This design was based on the actual load, on the basis of the optimal operation of the substation, shall, in accordance with the relevant regulations and specification, and completed the 35 kv substation that could satisfy the requirement of the enterprise power supply primary design. Design has carried on the statistics and computation to load first, choose the needed for the main transformer model, then according to the nature of the load and the power supply reliability requirements drawn up the main wiring design, considering the serious effect of short circuit on the system, also in the design of short circuit calculation was carried out in the design of the main high voltage electrical equipment selection and calculation, such as disconnecting switch current transformer voltage transformer and the power distribution and reactive power compensation, and improve the efficiency of the whole substation. KEYWORDS：35 kv substation，a part of the design， HYPERLINK app:ds:main \t main HYPERLINK app:ds:electrical \t electrical HYPERLINK app:ds:connection \t connection , power distribution unit 目录 TOC \o 1-