GSM移动通信系统中低通滤波器的设计与仿真 (毕业论文).docVIP

西安欧亚学院本科毕业论文（设计） 西安欧亚学院 本科毕业论文（设计） 题 目： GSM移动通信系统中低通滤 波器的设计与仿真 学生姓名： xxx 指导教师： xxx 所在分院： 信息工程学院 专 业： 通信工程 班 级： 统本通工0901 二O一三 年 五月 GSM移动通信系统中低通滤波器的设计与仿真 摘要：本文应用MATLAB软件中的Simulink平台分别研究了FIR数字低通滤波器和IIR数字低通滤波器的设计方法和实现方法，并进行模拟仿真设计，以显示本文所介绍数字低通滤波器的多种特性。 在无限脉冲响应（IIR）数字低通滤波器设计中，应用了冲击响应不变法和双线性Z变换法，先进行模拟滤波器的设计，然后把模拟滤波器转换为数字滤波器，最后进行滤波器的频带转换，使用MATLAB软件按两种方法编辑程序并通过图形展示IIF低通滤波器的各种参数和性能指标。在有限脉冲响应（FIR）低通数字滤波器设计中，讨论了FIR线性相位滤波器的特点和用窗函数法设计FIR滤波器两个问题。这两类低通滤波器整个设计过程都是按照理论分析、编程设计、模拟仿真、具体实现的步骤进行的。 关键词：数字低通滤波器、MATLAB、Simulink GSM mobile communication system design and simulation of the low-pass filter Abstract：In this paper, the application of MATLAB software Simulink platform respectively studied the FIR digital low-pass filter and IIR low-pass filter design methods and implementation method, and carries on the simulation design,to display a variety of characteristics of digital low-pass filter, presented in this paper. In infinite impulse response (IIR) digital low-pass filter design, the application of shock response is not political reform and bilinear z-transform method, first for the design of analog filter, then converted to a digital filter, the analog filter to filter the frequency conversion, using MATLAB software according to the two methods of editing program and through the graphic display of IIF low-pass filter parameters and performance indicators. In finite impulse response (FIR) low-pass digital filter design, discussed the characteristics of the FIR linear phase filter and FIR filter with window function method with two problems. These two types of low-pass filter the whole design process is in accordance with the theoretical analysis, programming design, simulation and implementation steps. Keywords: digital low-pass filter, the MATLAB, Simulink, PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT II 目录TOC \o 1-3 \h \u HYPERLINK \l _Toc23357 1 绪论 PAGEREF _Toc233