干式变压器温度控制器.PDFVIP

- BWDK-系列 BWDK- Series of 干式变压器温度控制器 Dry-type Transformer Temperature Controller 使用说明书 Operation Instructions 制造单位：南京圣尚科技有限公司 Manufactured by: Nanjing Shengshang Science Technology Co., Ltd. 地址：南京市工人新村 71 号 Address: No. 71, Gongrenxincun, Nanjing 电话：025 Tel: 025 联系人：彭永滨 Contact: Peng Yongbin No.1 南京圣尚科技有限公司 警告：主体变压器做高压绝缘实验时，请断开与本温控仪间的联线， 以确保温控仪安全。 Warning: When conduct the high-voltage insulation test to the main body of transformer, please disconnect it from the temperature controller so as to ensure the safety of the temperature controller. 一、概述 Outline BWDK 系列干式变压器温度控制仪是由微处理器构成的智能仪器，测量干式变压器三相 绕组的温度。根据设定的温度值，启停风机进行温度控制。仪器具有各种声光报警功能，是保 护干式变压器的重要装置。 BWDK series of dry-type transformer temperature controller is an intelligent instrument equipped with a microprocessor. Measure the temperature of three-phase windings of the dry-type transformer, and start and stop the fan for temperature control according to preset temperature value. With various sound and light alarm functions, the instrument is an important device for protecting the dry-type transformer. 仪器具有以下特点： The instrument has features as follows: 1. 仪器可以测量干式变压器三相绕组的温度，用 LED 每隔 4 秒循环显示三相温度值或定点显 示三相温度最大值。 It is capable of measuring the temperature of three-phase windings of the dry-type transformer, displaying in turn three-phase temperature values with a LED every 4 seconds or displaying the highest three-phase temperature periodically. 2. 仪器可以用按键输入 4 种温度设定值。当测量温度超过各设定值时，分别控制风机启停、超 温报警、超高温跳闸等。温度设定值可以随时修改，断电后不会消失。 Four preset temperature