墙壁式旋臂起重机结构设计与分析（全套图纸）.docxVIP

墙壁式旋臂起重机结构设计与分析 摘要：本次课题首先进行墙壁式旋臂起重机结构形式选择，然后将所选择结构转化为力学模型进行受力分析，并选择工件材料，确定工件尺寸。根据计算结果，在SolidWorks对所选墙壁式旋臂起重机结构进行三维建模，并运用ANSYS对所建三维模型进行静态有限元分析，分析内容包括起重机整体变形与其所受应力。墙壁式旋臂起重机是一种安装在墙壁上的起重设备，结构独特，安全可靠，具备高效、节能、省时省力、灵活等特点，在生产车间运用广泛。 关键词：墙壁式旋臂起重机；三维建模；结构设计；有限元分析 Structure Design and Analysis of Wall Jib Crane Abstract This paper chose the structure of the wall jib crane first,and then translated the selected structure into mechanical model for stress analysis, and selected the parts material and designed the dimension of the parts. After the design calculation, used SolidWorks to 3D model the selected wall jib crane, and used ANSYS static finite element to analyse the 3D model. The analysis include the overall deformation of crane and it’s stress. The crane structure is finally obtained.The wall jib crane is a lifting equipment installed on the wall. It has many features:unique stuctures, safe, reliable, high efficiency, energy saving, time saving, labor saving, flexible and so on.So it is widely used in the production workship. Keywords: Wall jib crane；3D model；Structure design；Finite element analysis 摘要···············································································Ⅰ Abstract············································································Ⅱ 目录···············································································Ⅲ TOC \o 1-3 \h \z \u HYPERLINK \l _Toc421692311 1 绪论 1 HYPERLINK \l _Toc421692312 1.1 本课题研究背景及意义 1 HYPERLINK \l _Toc421692314 1.2墙壁式旋臂起重机简介 2 HYPERLINK \l _Toc421692315 1.3墙壁式旋臂起重机结构类型 2 HYPERLINK \l _Toc421692316 1.4 本课题研究内容 3 HYPERLINK \l _Toc421692317 2 墙壁式旋臂起重机参数确定 5 HYPERLINK \l _Toc421692318 2.1墙壁式旋臂起重机型号与参数确定 5 HYPERLINK \l _Toc421692320 2.2 旋臂工字钢型号选择 6 HYPERLINK \l _Toc421692321 2.3 确定拉杆的材料和尺寸 7 HYPERLINK \l _Toc421692322 2.4 计算各螺栓连接 7 HYPERLINK \l _Toc421692323 2.5 确定各装配板的材料及尺寸 8 HYPERLINK \l _Toc421692324 3 墙壁式旋臂起重机三维建模 12 HYPERLINK \l _Toc421692325 3.1 墙壁式旋臂起重机建模方案 12 HYPERLINK \l _Toc421692327 3.2 主