基于单片机的电风扇智能控制论文（设计）外文文献综述.docVIP

本科毕业设计（论文）文献综述（学生用表） 学生姓名 学　号 题　目 基于单片机的电风扇智能控制 With the accelerated development of society, intelligent household appliances gradually accelerated, single chip as small size, light weight, high integration, anti-interference ability, cost-effective, it is particularly suitable for small control system. Fan through the MCU can be easily achieved by people achieve their goals. SCM has been widely used in fan applications. This article discusses the use of single chip design fans planning content. SCM Analysis MCU core fan control. Designed to focus on the practical application of SCM. AT89C51 MCU 51 most commonly used chips. In the system design, we can use as a controller AT89C51 microcontroller. AT89C51 is a flash with 4K bytes of erasable programmable read only memory, low voltage, high-performance CMOS8 bit microprocessor. The device uses high-density non-volatile memory ATMEL manufacturing technology manufacturing, and industry-standard MCS-51 instruction set and output pin compatible. Due to the multi-function 8-bit CPU and flash memory combined in a single chip, ATMELs microcontroller AT89C51 is a highly effective for many embedded control system provides a more flexible and inexpensive solution. Its main properties: You can compatible with MCS-51 microcontroller, 4K bytes of programmable flash memory, 1000 write / erase cycle life, 10 years data retention time, 128 * 8-bit internal RAM, 32 programmable I / O lines , two 16-bit timer / counters. It is the microprocessor, memory (RAM and ROM), input / output interfaces and timer / counter, an integrated circuit chip integrated. Then connect the temperature sensor, delay switch circuit, push-button magnetic switch, LED display, A / D, D / A converter circuit, SCR trigger control circuit, an oscillator, power supply circuit and other modules. A controlling microcomputer, which is equivalent to the human brain. By the temperature sensor for temperature acquisition, the acquisition sent to the indoor temperature m