fltm bi106-01(油漆附着力).pdf

FORD LABORATORY TEST METHOD BI 106-01 PAINT ADHESION TEST Application This method is used to measure the relative adhesion of paint to steel, aluminum, galvanized steel, plastic, or other substrates. Apparatus Required Knife A pocket knife of good quality is required for Method A and C of this procedure as outlined for scratch test. It must have a 65 - 75 mm long blade and be 10 mm wide. Scriber A carbide-tipped scriber must be used in Method B and D of this procedure for the scriber test. Source: Aircraft Specialties, Inc. (#90C) G.T.S. Co. (General Scriber #CM88) P.O. Box 98 12015 Telegraph Rd. Lapeer, MI 48446 U.S.A. Redford, MI 48239 U.S.A. (303) 664-2981 (313) 531-7666 James Neill Tools (Eclipse Model 225) James Neill Sheffield Ltd. Sheffield S11 8 HB U.K. Materials Required Panels See FLTM BI 103-02 for panel preparation. Adhesion Tape No. 898 (Minnesota, Mining and Manufacturing Co. - 3M) 25 mm wide. Use only No. 898 tape that is made in the North America. Other No. 898 tapes have different adhesion characteristics. Store in the original package in a dry, dark location. Date Action Revisions 2002 07 15 Revised Rev Adhesion Tape para L. Graham 2001 03 14 Revised Editorial – no technical change A. Cockman 1992