年产60万吨棒材生产车间工艺设计 金属材料工程专业毕业设计 毕业论文.doc

PAGE 2 第 PAGE 2 页 年产60万吨棒材生产车间工艺设计 摘 要 本设计为年产60万吨棒材车间工艺设计。产品为Φ16～Φ36mm的热轧带肋钢筋和圆钢，主要钢种为碳素结构钢，优质碳素结构钢，低合金钢，产品质量执行国家标准。根据成品规格选择尺寸为150mm×150mm×10000mm的连铸坯为原料，加热炉为三段步进梁式加热炉。本设计采用全连续轧制生产工艺，全线共有轧机18架，其中粗轧机6架，中轧机6架，精轧机6架，终轧最大轧制速度为13m/s。设计中采用的孔型系统为：扁箱（1#）—方箱（2#）—椭（3#）—圆（4#）—椭（5#）—圆（6#）—椭（7#）—圆（8#）—椭（9#）—圆（10#）—椭（11#）—圆（12#）—椭（13#）—圆（14#）— 关键词：工艺设计，热轧带肋钢筋，型钢、连铸坯，全连续轧制 Process Design of hot rolled bar Workshop with Production Capacity of 600,000 t/a Specialty：Metal Material Engineering Name： Instructor： Abstract This is the technology design for producing six-hundred thounsands tons of hot rolled bar workshop per year. The size of the product is between Φ16 and Φ36 with the major steel grade of the carbon structural steel ,the carbon constructional quality steel or the low alloyed steel.And we carry out national standard during the production .According to the size of product we use the concast billets with the size of 150mm×150mm×10000mm for the raw material and the Walking Beam Heating Furnace . We use continuous rolling technology ，there is 18 mill in common ,6 for roughing mill ,6 for medium mill ,6 for finishing mill . The largest end mill speed is about 13m/s .In the production of steel rolling we use the pass system of square－square－ellipse－circle－ellipse－circle－ellipse－circle－ellipse－circle－ellipse－circle－ellipse－circle－ellipse－circle－ellipse－circle． Key words：process design，hot rolled ribbed bar，shape steel ，concast billet，fully continuous rolling 目录 TOC \o 1-2 \h \z \u HYPERLINK \l _Toc 1 绪论 PAGEREF _Toc \h 1 HYPERLINK \l _Toc 2 产品方案和产品标准 PAGEREF _Toc \h 5 HYPERLINK \l _Toc 2.1 产品方案的制定 PAGEREF _Toc \h 5 HYPERLINK \l _Toc 2.2 计算产品的选择 PAGEREF _Toc \h 6 HYPERLINK \l _Toc 2.3 产品标准与技术要求 PAGEREF _Toc \h 7 HYPERLINK \l _Toc 3坯料选择和金属平衡表 PAGEREF _Toc \h 10 HYPERLINK \l _Toc 3.1 坯料选择 PAGEREF _Toc \h 10 HYPERLINK \l _Toc 3.2 金属平衡表 PAGEREF _Toc \h 10 HYPERLINK \l _Toc 4