路基路面工程设计.docVIP

PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 1 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 1 路基路面工程 路基路面工程 专 业： 交通土建 班 级： 交通10152 姓 名： 陈文卿 学 号：8 指导老师： 胡翔老师 2013年12月22日 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 1 PAGE \* MERGEFORMAT PAGE \* MERGEFORMAT 1 目录 TOC \o 1-3 \u 路基工程课程设计 PAGEREF _Toc3255 2 一、选择挡土墙断面尺寸··············································4 二、墙顶以上填土土压力的计算········································4 三、墙身截面强度验算················································6 1、强度的计算·····················································6 2、稳定计算·······················································7 3、正截面直接受剪时验算···········································8 四、基础底面强度（应力）验算········································8 1、基础底面的压应力···············································8 2、基底合力偏心距·················································9 3、地基承载力抗力值···············································9 五、墙体稳定验算···················································10 1、抗滑稳定性验算················································10 2、抗倾覆稳定性验算··············································10 参考文献···························································10 路基工程课程设计 设计资料： 浆砌片石重力式路堤墙，墙高H=4米，填土高a=2米，填土边坡1：1.5，填料容重γ=18 KN/m3，φ=35°。墙背选用仰斜1：0.25（α2= -14°02′），δ=1/2φ，基底摩擦系数f1=0.5，地基容许承载力［σ0］=800kPa。7.5号砂浆砌30号片石墙身。 圬工容重γk=23 kN/m3,［σa］=600kPa,［σj］=50kPa,［σL］=60kPa,［σWL］=80kPa,墙身分段长度为10米，设计荷载公路－Ⅰ级，路基宽度8.5米，路肩0.75米，基底土的内摩擦系数f2=0.80，地基土容重γ1=19 kN/m3,墙身容许偏心率：主要组合［ρ1］=0.25，附加组合［ρ1］=0.30，基底容许偏心率［ρ2］=0.2。 设计内容： 1、通过试算，选择断面尺寸。 2、墙顶以上填土土压力的计算。 3、墙身断面（基顶）强度验算。 4、基础底面强度（应力）验算。 5.墙体稳定验算。 设计成果： 1、设计计算书（20页左右） 2、墙顶以上填土土压力计算图 3、墙身断面强度验算图 4、基础底面强度及稳定验算图 设计要求： 1、设计任务书下达后，应立即着手进行设计资料的收集和教材中相关内容的复习工作。 2、要求每个学生充分发挥独立工作能力和钻研精神，培养分析问题和解决问题的能