单片机水塔水位基于单片机的水塔水位控制的软硬件设计论文.docVIP

南 京 工 程 学 院 本科毕业设计（论文） 题 目：基于单片机的水塔水位控制的软硬件设计 专 业：机械电子工程 班级： 机电本（1）班 学 号： 学生姓名： 指导老师： 起迄日期： Graduation Design (Thesis) Water tower water level control system software and hardware design Supervised by Nanjing Institute of Technology 南京工程学院毕业设计说明书（论文） 摘 要 水塔水位控制系统的软硬件设计 水塔水位控制系统是我国住宅小区广泛应用的供水系统,传统供水系统大多采用水塔、高位水箱或气压罐式增压设备,用水泵以高出实际用水高度的扬程来“提升”水量,其结果增大了水泵的轴功率和能耗。现使用单片机技术设计一种能自动检测水位，并根据水位变化的情况自动调节的自动控制系统。 水塔是供水系统中常用的设备，基于单片机的水塔水位控制系统使水塔水位保持在一定的位置，以满足用水的需要。本设计的目的是用单片机设计一个控制系统，用来对水塔水位进行控制。水塔水位控制系统的研究对于提高供水系统的自动化水平、提高生产效率具有重要的意义。本设计主要研究对系统硬件的各个部分进行选型，研究芯片之间的连接方法，以系统对水塔水位的控制思想用汇编语言对控制程序进行设计。 关键词：单片机；水塔；水位控制 Abstract Water tower water level control system is the wider use of residential quarters of Chinas water supply system .Most of the traditional water supply system using cooling towers, water tanks, or high pressure tank pressurization equipment, Pump water higher than the actual height of the head to upgrade of water, resulting in increased pump shaft power and energy consumption. Are used to design a single-chip technology to automatically detect the water level and water level changes in accordance with the automatic adjustment of the automatic control system. Towers are commonly used in water supply system equipment, MCU-based water level control system enables water tower water tower to maintain a certain level so as to meet the needs of water. The purpose of this design is the design of a single-chip control system to control the water level of the water tower. Water tower water level control system to improve the automation level of the water supply system, increasing productivity is of great significance. The system primarily designed to study the various parts of hardware selection, research-chip connection between the methods, T