AS1108WL;AS1108WL-T;AS1108PL;中文规格书Datasheet资料.pdfVIP

Datasheet AS1108 4-Digit LED Display Driver 1 General Description 2 Key Features The AS1108 is a compact display driver for 7-segment 10MHz SPI-, QSPI-, Microwire-Compatible numeric displays of up to 4 digits. The device can be Serial I/O programmed via SPI, QSPI, and Microwire as well as a Individual LED Segment Control conventional 4-wire serial interface. Segment Blinking Control (can be synchronized The device includes an integrated BCD code-B/HEX across multiple drivers) decoder, multiplex scan circuitry, segment and display Hexadecimal- or BCD-Code/No-Decode drivers, and a 32-bit memory. Internal memory stores Digit Selection the LED settings, eliminating the need for continuous 3µA Low-Power Shutdown Current (typ; device reprogramming. data retained) Every segment can be individually addressed and Extremely Low Operating Current 0.5mA in updated separately. Only one external resistor (RSET) is Open-Loop required to set the current through the LED display. LED Digital and Analog Brightness Control brightness can be controlled by analog or digital means. Display Blanked on Power-Up The device can be programmed to use the internal Drive Common-Cathode LED Displays code-B/HEX decoder to display numeric digits or to Supply Voltage Range: +2.7 to +5.5V directly address each segment.