滑动轴承一维温度场稳态热效应研究.PDFVIP

第 30 卷 第 32 期 中 国 电 机 工 程 学 报 Vol.30 No.32 Nov.15, 2010 2010 年 11 月 15 日 Proceedings of the CSEE ©2010 Chin.Soc.for Elec.Eng. 91 0258-8013 (2010) 32-0091-05 TM 133 A 470 20 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 滑动轴承一维温度场稳态热效应研究 刘大全，苗同臣 (郑州大学工程力学系，河南省 郑州市 450002) One-dimensional Steady State Thermal Effects of Journal Bearings LIU Daquan, MIAO Tongchen (Department of Engineering Mechanics, Zhengzhou University, Zhengzhou 450002, Henan Province china) ABSTRACT: A simplified one-dimensional thermal model 置、油膜压力分布和油膜破裂边界影响巨大[1-6] 。本 was built on the basis of the original two-dimensional thermal 文将以轴承二维温度场模型为基础，基于广义雷诺 model. Firstly, the oil-temperature governing equation and the 方程和油膜温度控制方程解耦的思想[7]，对二维温 generalized Reynolds equation were uncoupled by assuming 度场作进一步合理简化，提出油膜和轴瓦径向温度 that the Poiseuille term of the circumferential velocity can be 分别用三次多项式和对数函数形式近似表示，建立 neglected. Then the temperature variation across the film was assumed to be represented by a cubic polynomial, including the 温度场周向分布的一维模型，再与广义雷诺方程快 thermal boundary conditions at fluid film-solid interfaces, a 速算法[8]相结合，使原本复杂的三维分析温黏效应 simplified form of one-dimensional film temperature system of 下的轴承非线性油膜力模型既体现热效应影响的 governing equations was derived by integrating across the film 实质，同时非线性油膜力计算程序又易于实现。与 thickness and the analysis formula of film-bush interface 文献[7]不同的是，本文一维模型油膜和轴瓦接触面 temperature was obtained. The calculated r