电磁式继电器特性参数测试系统的设计与实现.PDFVIP

第2 1卷 第1期 苏州市职业大学学报 Vol .2 1,No .1 2010年3月 Journal of Suzhou Vocational University Mar . ,2010 电磁式继电器特性参数测试系统的设计与实现 淮文军 尚 丽 张进峰 ， ， (苏州市职业大学 电子信息工程系，江苏 苏州  215104） 摘 要： 以MSP430F169单片机作为控制和测量的核心部件,辅以直流稳压电源模块、功率放大电 路模块、恒流源模块、按键和数码管显示模块等组成一个电磁式继电器特性参数测试仪,完成对 943 1C 12DS电磁式继电器最小吸合电压、最大释放电压、继电器线圈电压为额定值时的触点吸合 - - 时间、释放时间以及触点接触电阻值的测试,该系统能够实现成套参数自动测量,所有测试数据通 过74HC573数码管进行显示.实验结果表明,该系统能满足继电器的测试要求,为继电器质量和可 靠性分析提供了依据. 关键词：MSP430F169；电磁式继电器；功率放大电路；测试系统 中图分类号：TP271 文献标志码：A 文章编号：1008-5475(2010)01-0029-04 Design and Implementation of Electromagnetic Relay Characteristic Parameters Measuring System ， ， HUAI Wen-jun SHANG Li ZHANG Jin-feng (Department of Electronic Information Engineering, Suzhou Vocational University, Suzhou 215104, China) Abstract: MSP430F169 microcontroller was the core components of control and measurement function of an electromagnetic relay characteristic parameter tester. The tester also included DC power module, power amplifier module, constant current source module, keys, and digital tube display module. The tester could test the data of 943-1C-12DS electromagnetic relays including the minimum pull-in voltage, maximum release voltage, relay coil voltage rating when the pull-contact time, release time as well as the contact value of the contact resistance. The system could complete automatic measurement parameters to achieve all the basic requirements of design. And all of the test data was displayed through the 74HC573 digital tube. The test results show that the system can meet the relay testing