聚苯胺复合导电纤维的制备与研究ynjgnzoe.doc

聚苯胺复合导电纤维的制备与研究ynjgnzoe.doc

  1. 1、本文档共42页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
聚苯胺复合导电纤维的制备与研究ynjgnzoe

PAGE 6 毕业设计(论文) 题 目:聚苯胺复合导电纤维的制备与研究 学 院: 纺织与材料学院 专业班级: 纺织工程(针织服装)08级(2)班 指导教师: 职称: 讲师 学生姓名: 学 号: 摘 要 涤纶是世界上产量最大,应用最广泛的合成纤维品种之一。目前涤纶占世界合成纤维产量的60%以上,大量用于衣料、 HYPERLINK /view/219710.htm \t _blank 床上用品、各种装饰 HYPERLINK /view/1256627.htm \t _blank 布料、国防军工特殊织物等纺织品以及其他工业用纤维制品,如过滤材料、绝缘材料、 HYPERLINK /view/33764.htm \t _blank 轮胎帘子线、传送带等。由于涤纶的回潮率比较低,静电现象严重,很大程度上限制了涤纶制品的应用。 以涤纶纱线为基质,以苯胺为原料,采用原位聚合法,制备了聚苯胺/涤纶复合导电纱线, 研究了碱处理的浓度、温度、氧化剂浓度和掺杂酸用量等因素对纱线导电性能及物理性能的影响,得出了最佳工艺条件。结果表明,通过控制反应的条件, 可使涤纶纤维有效吸附聚苯胺,制备出性能良好的导电纱线。其最佳工艺条件为:NaOH浓度为50g/L,反应温度为80℃,碱处理时间为2h,过硫酸铵/苯胺单体摩尔比为1:1,硫酸浓度为1mol/L,反应时间为6h,反应温度为15~25℃。 采用原位聚合法制备了涤纶/聚苯胺复合导电织物, 对比研究了碱处理、掺杂酸的浓度、氧化剂与苯胺摩尔比等因素对聚合反应的影响,确定了最佳工艺条件:涤纶碱减量的时间为90min,碱处理温度为95℃,浴比为1:20,过硫酸铵/苯胺单体摩尔比为1:1,硫酸浓度为1mol/L,反应时间为2h,反应温度为15~25℃。 关键词:涤纶,聚苯胺,原位聚合法,复合导电纱线,复合导电织物 ABSTRACT Polyester is the worlds largest output synthetic fiber which is widely used in the world. Polyester accounts for more than 60 percent of the worlds synthetic fiber production, and it is used extensively for clothing, bedding, a variety of decorative fabrics, national defense and special fabric textiles and other industrial fiber products, such as filter materials,insulation materials, tire cord, conveyor belts. Polyester has low moisture regain and static electricity, which largely limits the application of polyester products. Preparing polyaniline/polyester compound conductive yarn though in-situ polymerization synthesis and use aniline as a monomer and polyester fiber as a matrix. The optimal reaction condition could be gotten from the experimental results. The results show that, by controlling the reaction conditions, good performance conductive fibers which absorp polyaniline effectively can be prepared. The optimal reaction conditions: the density of caustic soda is 50g/L, the reaction temperature 80℃, the alkali treatment time is 2h, the molar ratio of ammonium persulfate and aniline is

文档评论(0)

beoes + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档