5.1 Equipment installation and construction process设备安装施工工艺.docx

China Nuclear Industry Fifth Construction Co., Ltd 中 国 核 工 业 第 五 建 设 有 限 公 司 Technical Proposal TENDER No: 2013 ERXNY 004 DPC K5BPO 00 Special programs Rev. Page PAGE 1 of NUMPAGES 4 2013/8/19 Equipment installation and construction process设备安装施工工艺 5.1.1 General概述 5.1.2 The basis for preparing编制依据 5.1.3 Static equipment installation 静设备安装 5.1.4 Rotating equipment installation 动设备安装  Equipment installation and construction process设备安装施工工艺 General概述 The construction process prepared for BMSC PCS Expansion Line 200kt Project – DPC MEP Installation Works 本施工工艺为拜耳材料科技（中国）有限公司，拜耳材料科技中国20万吨/年聚碳酸酯扩建项目DPC项目机电设备安装工程而编制 The project equipment totaling 181 units, rotating equipment about 20 units, single maximum weight of 135 tons of phosgene reactor, monomer is greater than 20 tons of equipment 8. 该工程项目设备共计181台，动设备约20台，单台最大重量135吨的光气反应器1台，单体大于20吨设备8台。 The basis for preparing编制依据 Bayer DPC expansion project tender documents 拜耳DPC扩建项目招标文件 Code for quality acceptance of static equipment installation in petrochemical engineering 石油化工静设备安装工程施工质量验收规范GB50461-2008 Technical procedure for construction of static equipment installation in petrochemical industry 石油化工静设备安装工程施工技术规程SH/T3542-2007 General code for construction and acceptance of mechanical equipment installation engineering 机械设备安装工程施工及验收通用规范GB50231-2009 Code for construction and acceptance of conveyor equipment installation engineering 连续输送设备安装工程施工及验收规范GB50270-2010 Code for construction and acceptance of fan, compressor and pump installation 压缩机、风机、泵安装工程施工及验收规范GB50275-2010 Code for construction and acceptance of crane installation engineering 起重设备安装工程施工及验收规范GB50278-2010 General Specification for construction and acceptance of mechanical equipment installation in petrochemical industry 石油化工机器设备安装工程施工及验收通用规范SH/T3538-2005 Specification for construction and acceptance of pump unit installation in petrochemical industry 石油化工泵组