利用Hypermesh和nastran创建mnf流程.docVIP

利用Hypermesh和nastran创建mnf流程 建立几何模型，定义材料属性、单元属性。 创建约束和特征值卡，如下： 约束为无量纲。定义为mis1,选择下列四点确定一个节点集定义。 定义单元集。 特征值为EIGRL特征。 对控制卡进行设置 sol （2）PARAM (3) case_unsupported_cards ADAMSMNF FLEXBODY=YES,OUTGSTRN=YES,OUTGSTRS=NO RESVEC=NO GPSTRAIN(PLOT)=ALL OUTPUT(POST) SURFACE 101 SET 100 NORMAL X3 FIBRE=Z1 bulk _unsupported _cards DTI,UNITS,1,KG,N,M,S global_case_control Output 栏中点选EIGRL卡 Output 栏中 点选EIGRL卡 Gpstress=all 相关文档; Translating MSC.Nastran Data ? There are two different interfaces that you use to translate MSC.Nastran data for use in ADAMS/Flex. Learn about: HYPERLINK file:///C:\\MSC.Software\\MSC.ADAMS\\2005r2\\help\\mergedProjects\\flex\\flex_gen\\nastran_2004.htm Using MSC.Nastran 2004 and Above HYPERLINK file:///C:\\MSC.Software\\MSC.ADAMS\\2005r2\\help\\mergedProjects\\flex\\flex_gen\\msc_nastran6.html Verifying the Model HYPERLINK file:///C:\\MSC.Software\\MSC.ADAMS\\2005r2\\help\\mergedProjects\\flex\\flex_gen\\msc_nastran7.html Computing Stress/Strain Modes HYPERLINK file:///C:\\MSC.Software\\MSC.ADAMS\\2005r2\\help\\mergedProjects\\flex\\flex_gen\\xrb.htm XRB Support for Stress/Strain Modes HYPERLINK file:///C:\\MSC.Software\\MSC.ADAMS\\2005r2\\help\\mergedProjects\\flex\\flex_gen\\shortened_stress_modes.htm Shortened Stress/Strain Modes ? Using MSC.Nastran 2004 and Above ? Starting in version 2004, MSC.Nastran provides an improved interface for generating HYPERLINK javascript:void(0); modal neutral files (MNFs) . The new MSC.Nastran ADAMS Interface allows you to generate an MNF directly from MSC.Nastran without generating an OUTPUT2 file. The MSC.Nastran ADAMS Interface does not require a DMAP alter or a translator to convert MSC.Nastran output files to MNFs. The MSC.Nastran ADAMS Interface is a licensed feature of MSC.Nastran. For more information, contact your local sales representative. If you already have the MSC.Nastran ADAMS Interface license, refer to the MSC.Nastran Quick Reference Guide and Reference Manual for info