基于PLC的自动控制分拣系统的设计(同名709).docVIP

摘 要 PLC控制是目前工业上最常用的自动化控制方法，由于其控制方便，能够承受恶劣的环境，因此，在工业上优于单片机的控制。PLC将传统的继电器控制技术、计算机技术和通信技术融为一体,专门为工业控制而设计,具有功能强、通用灵活、可靠性高、环境适应性强、编程简单、使用方便以及体积小、重量轻、功耗低等一系列优点,因此在工业上的应用越来越广泛。 本文主要讲述PLC在材料分拣系统中的应用，利用可编程控制器( PLC) ,设计成本低、效率高的材料自动分拣装置。以PLC 为主控制器,结合气动装置、传感技术、位置控制等技术,现场控制产品的自动分拣。 系统具有自动化程度高、运行稳定、精度高、易控制的特点,可根据不同对象,稍加修改本系统即可实现要求。 关键词: 可编程控制器，分拣装置，控制系统，传感器 ABSTRACT PLC control is the most commonly used industrial automation control method, because of its convenient control to withstand an adverse environment, it is better than MCU control in the industrial. PLC traditional relay control technology, computer and communication technologies are integrated specifically for industrial control and design, have strong function, common flexible, high reliability and environmental adaptability, and programming simple, easy to use and small size, light weight, a series of low-power advantages in industrial applications become more extensive. This paper focuses on the PLC in the canned beverage production, The design of an automatic sorting device with low cost and high efficiency is presented in the paper, which regards programmable logic controller ( PLC) as the master controller and combines pneumatic device, sensing technology, position control and other technology to implement automatic selecting of the products live. The device is characteristic of high automation, steady running, high precision and easy control, which can fulfill the requirement according to different situations with little modifications. Key words： programmable logic controller，sorting device，control system，sensors 目录 TOC \o 1-2 \h \z \u HYPERLINK \l _Toc230410290 摘 要 PAGEREF _Toc230410290 \h I HYPERLINK \l _Toc230410291 目录 PAGEREF _Toc230410291 \h II HYPERLINK \l _Toc230410292 绪 论 PAGEREF _Toc230410292 \h 1 HYPERLINK \l _Toc230410293 第1章 材料分拣装置结构及总体设计 PAGEREF _Toc230410293 \h 2 HYPERLINK \l _Toc230410294 1.1 材料分拣装置工作过程概述 PAGEREF _Toc230410294 \h 2 HYPERLINK \l _Toc230410295 1.2 系统的技术指标 PA