ZL05微型轮式装载机总体设计说明书.docVIP

中文摘要 装载机是工程机械的主要机种之一，作业效率高，本次设计的题目是ZL05装载机总体及其工作装置设计，此设计的主要内容如下： 装载机总体计算及分析，包括发动机参数选择，整机性能参数确定，总体参数评价，装载机铲装阻力的计算，整机的自重及桥荷分配，最大牵引力计算，最大爬坡度计算。 装载机总体中工作装置设计，包括铲斗斗型的选择，铰点位置确定，动臂、摇臂、拉杆长度和截面形状确定，工作装置受力分析及校核强度，各铰销强度校核，拉杆稳定性计算。 液压系统的分析与计算，包括工作液压系统设计参数及压力计算，油缸所需流量计算，油泵的选择，液压件的选择，转向液压系统的最小转弯半径，转向阻力及工作压力计算。 前后车架的铰接力式及工艺要求。 此外，还在ADAMS中建立了此装载机工作装置的模型并进行了运动仿真，并且测出了其最大卸载高度和斗尖的位移﹑速度﹑加速度曲线。 关键词 总体设计 工作装置 液压系统 车架 外文摘要 Title the whole design of the loader ZL05 Abstract Loader is one of the main models of the engineering machines. The homework efficiency is high. The topic of this design is the total and its work equip of the loader ZL05. The main contents of this design is as follows: The total calculation and analysis of the loader. It includes the choice of launch the machine parameter, the assurance of the whole machine function parameter, the choice of the theories leads characteristic parameter, the analysis of the theories leads characteristic parameter, the calculation of the theories leads characteristic parameter, the evaluation of the total parameter ,the calculation that the machine spade packs resistance, the whole machine of self-respect and the bridge lotus allotment, the calculation of the biggest lead the dint, the calculation of the biggest climb a slope. The design of work equip, including the choice of the spade type, the assurance of orders position, the assurance of the length to moving arm,shake arm and pulling the pole, the assurance of cutting the noodles shape, working equips analysis by dint and the school check strength, the calculation of the pulling pole stability . The analysis and calculation of the liquid presses system, including the work liquid to press the system design parameter and the pressure calculation, the discharge calculation of the oil urns needing, the choice of the oil pump, the choice of the liquid presses, the calculation of changing direction a liquid to press system of minimum turn radius, change direction resistance and wo