在超导薄膜上设计微波双工器的数值计算研究.PDF

華|商工程學報第二十-期民國九卡入年六月中國文化大學工學院 Hua Kang Journal of Engineering Chinese Culture University vol.21 (2007) P.117-l20 A Sil畫畫晶磊話。盟S臨錯y ofthe 1\宜icFGW鐘ve Dipl誼會ro蠶 th會Supe當co聽過臨的ivityτhi聽 Film Chien-1\-宜ing Lei Chinese Culture University Institute ofMaterials Science andNanotechnology Abstract We use the general coupled matrix method to design the planar microwave diplexer on the superconductivity YBa2Cu307 (YBCO) thin film with the MgO substra妞， which has an attenuation pole near cutoff frequency with each one filter. Both two high performance bandpass filters can be synthesized by using multipleλ/2個resonators and can be combined the two filters to f01ill a diplexer. The attenuation poles will improve the selectivity of the diplexer and can be obtained by modifying the traditional Chebyshev frequency response. A practical design technique using coupling matrix synthesis algorithm with Chebyshev filtering function , including theoretical and simulated results will be demonstrated. 0 Key words: Microwave filter ,Diplexer ,YBCO 在超導薄膜上設計微波雙工器的數值計算研究 當健明 中國文化大學材料科學與奈米科技研究所 摘要 TAO 本文中使用柴比雪夫多項式，配合搞合矩陣法成功的設計平面式雙工器，並選擇以 氧化鎮為基版的主乙鎮銅氧高溫超導薄膜為設計材料。將兩組由四個二分之一波長共振器組 成，具有多個零點高效能帶通濾渡器，相結合設計而成雙工器。利用柴比雪夫多項式具傳 輸零點的特性，可以提高雙工器對頻率的選擇能力o另外利用主乙鎮銅氧高溫超導薄膜零電 阻的優點，在低溫下操作更可以降低微波的損耗，提高雙工器效能。詳細的設言十潭、理與計 算的結果，將於文中討論。 關鍵字:微波濃、波器，雙工器，主己主貝銅氧 1. Introduction device at liquid nitrog巳n temperature. Microwave derives utilize both the superconducting properties The discovery of high T sup巳rconductor (HTSC) (low surface resistance) of the HTSC mat