电风扇锁紧盖垫片的注塑模具设计毕业设计p4taarav.docVIP

PAGE 学号 毕业设计 题目:电风扇锁紧盖垫片的注塑模具设计 作 者 届 别 2015届 系 别 南湖学院机电系 专 业 机械设计制造及其自动化 指导老师 职 称 讲师 完成时间 2015年5月 摘 要 这个文章是关于电风扇锁紧盖垫片的模具设计，我通过这个设计流程去全面的介绍注塑模具的整个设计过程。 在这个设计过程中，通过对塑件进行工艺性分析来确定塑件的工艺性能不能符合模具的设计要求；然后对模具进行结构分析，主要包括塑件的工艺技术要求和生产经济性要求。整个过程包括分型面的选择、塑件位置、型腔数量和布局的确定、浇注系统，排气机构，成型零件，脱模机构，合模导向机构，温度调节系统，分型机构，模架总体等设计和选择注塑机；最后我们通过前面的塑件、模具结构分析，灵活的应用CAD、PRO/E等绘图软件画出理想中模具工件、零件、装配图等，然后分析模具的运行过程来确定模具是否可行，进而对这次设计进行总结。 关键词：注塑模具；塑件分析；模具设计；Pro/E；CAD  Abstract This article is about fan lock the die design of the cover gasket, I through the design process a comprehensive introduction to the whole design process of injection mold. In the design process, through to the plastic parts manufacturability analysis to determine the parts of process performance can not conform to the requirements for the design of the mould; Then analysis of mould structure, mainly including plastic parts processing technology and production efficiency requirements. The whole process including the parting surface selection, location and the determination of cavity quantity and layout, pouring system, exhaust, molding parts,demoulding mechanism, guide mechanism, temperature regulating system, classification, overall design and selection of die set injection molding machine, We finally through the analysis of the structure; mould front, flexible application of CAD, PRO/E drawing software such as draw the ideal of the mould, parts, assembly drawings, three-dimensional figure, etc, and then analyses the operation process of the mould to determine whether it is feasible to mould, and then to summarize the design. Keywords : injection molding; Analysis of plastic parts; Mold design; Pro/E; CAD. 目 录TOC \o 1-3 \h \u HYPERLINK \l _Toc27275 第一章 绪论 PAGEREF _Toc27275 1 HYPERLINK \l _Toc21604 1.1 前言 PAGEREF _Toc21604 1 HYPERLINK \l _Toc11342 1.2 对注塑模具现状及发展趋势的认识 PAGEREF _Toc11342 1 HYPERLINK \