（毕业设计论文）《基于Moldflow软件注塑件的浇注系统优化》.docVIP

PAGE 毕 业 论 文 （科 学 研 究 报 告） 题 目 基于Moldflow软件注塑件的浇注 系统优化 院(系)别 机电及自动化学院 专 业 机械工程及自动化 级 别 学 号 姓 名 指导老师 摘 要 为缩短产品开发周期 ,降低成本及提高产品质量 ,越来越多的企业使用计算机辅助工程(CAE)技术进行工艺参数优化。运用MoldFlow软件进行浇注系统优化设计,我们能够找到最佳浇口位置；本设计介绍了 Moldflow软件的作用, 通过应用 MPI5.0软件对 6种CAE流动方案进行了填充对比分析, 得到了一种切实可行的方案 , 借助MoldFlow模拟分析软件的MPI(Moldflow Plastics Insight)对某注塑产品的注射成型进行了计算机模拟、分析, 根据结果进行熔接痕和气穴情等分析, 并优化设计了模具的浇注系统, 获得了较高预测质量的产品, 说明了CAE技术对塑料模具的设计及塑料制品的成型具有较强的指导作用。 充分展现了 CAE技术在浇注系统设计和注射模开发过程中所起的突出作用。 基于塑料模具设计的关键技术，介绍了 Moldflow/MPI CAE 解决方案，用薄壁塑件实例详述了Moldflow/MPI在注射模具优化设计中的应用。Moldflow/MPI分析结果与实践中采用的方案相似，说明了 Moldflow/MPI在注射模具优化设计中结果的可靠性。 关键词: 浇注系统， MoldFlow，优化设计  ABSTACT In order to reduce the development cycle and cost of products and improve the quality , the computer aided engineering(CAE) technology is being used more and more enterprises to optimize process parameters. Moldflow software is used for Design Optimization of injection mold .we can find a best gate location by using Moldflow .Then ,Comparison and analysis was made between six CAE plastics feeding schemes by applying MPI 5. 0 software and a feasible plan was obtained. With the help of MoldFlow simulating analysis software MPI, injection forming is simulated and analyzed by computer for a kind of injection product, according to the result to analyze melting-joint imprint and bubble chamber, injecting system of mold is optimized and designed, prediction of high quality products is obtained, it proves that CAE technology has strong guidance function to plastic mold design and plastic products forming. It fully reveals the outstanding effect of CAE technology in design of feeding system and development of injection mould. Based on the key technology of plastic injection mold design, the solution of Moldflow/MPI CAE is introduced．The application of Moldflow/MPI in optimizing the design of plastic injection mold is elaborated with an instance of thin wall plastics．The results analyzed by Moldflow/MPI is