（毕业设计论文）串行总线光纤收发器设计与实现.doc

PAGE w w 山 东 工 商 学 院 SHANDONG INSTITUTE OF BUSINESS AND TECHNOLOGY 毕业论文(设计) GRADUATION　THESIS　（DESIGN） 论文（设计）题目 Title Of Thesis（Design） 串行总线光纤收发器设计与实现 分院（系别） Department 信息与电子工程学院 专业 Speciality 电子信息工程 班级 Class 电子082班 论文（设计）作者 Author of Thesis（Design） 　 　 论文完成日期 Date 2012年05月 论文（设计）指导教师 Advisor 　 　 指导教师职称 The Title of Advisor 　 教授 　 串行总线光纤收发器设计与实现 Serial Bus Optical Fiber Transceiver Design and Implementation Nie Tengzhi 2012年 5月 May 2012 w 串行总线光纤收发器设计与实现 [摘要] 随着光纤网络产品的日益普及，在网络布线中，越来越多的用户开始考虑使用光纤来代替传统的铜缆。其中采用“光纤收发器”来实现光纤布线是一种较为经济有效的方式。本文提出了一种基于光纤收发一体化而设计的接口方案及其实现方法。以ARM为核心，由光电模块、总线控制器、光纤等组成一个数据收发系统。该系统由发送端总线控制器输出电信号，通过光电模块转换成光信号，经光纤传送至接收端光电模块并转化成电信号，最后传送至接收端总线控制器。在实物制作中重点完成系统外围电路的设计，通过外围电路的滤波功能实现光纤与总线控制器之间的信号传输，最后利用ARM开发板、光电转换器和总线控制器等器件，Keil、altium designer等开发工具，完成整个串行总线光纤收发器接口电路。 [关键词]光纤收发器 串行总线 ARM 光电模块 光纤通信  Serial Bus Optical Fiber Transceiver Design and Implementation [Abstract] With the growing popularity of fiber-optic network products, more and more users start to consider the use of fiber instead of traditional copper in network cabling. In which the fiber optic transceivers to fiber optic cabling is a more cost-effective manner. This paper proposed interface program and its implementation which based on the integration of fiber optic transceivers. The data transceiver system composed of photovoltaic modules, the bus controller, fiber and ARM which as this system’s core. The system bus controller output electrical signal from the sending end, through the photovoltaic modules to convert electrical signal to optical signals, and then through fiber optic transmission to the receiving end of photovoltaic modules and converted into electrical signals, and finally sent to the receiving end bus controller. Focus in the physical production system peripheral circuit design, through filtering, the function of external circuit, then the signal can transmit between the fiber and the bus controller, and fi