168摩托车车架头部焊接生产的工艺设计（毕业学术论文设计）.docVIP

精品 XX大学本科学生毕业设计（论文） 168摩托车车架头部焊接生产的工艺设计 校徽 学 生：X X X 学 号：20XXXXXX 指导教师：X X X 专 业：XXXXXXXX XX大学XX学院 二OXX年X月  Graduation Design (Thesis) of XX University The Welding Technology Design of the Head of the 168 Motorcycle Frame Undergraduate: XXX Supervisor: XXX Major: XXXX XXX XXXX XX 20XX 精品 摘 要 本文主要是对摩托车车架头部进行焊接工装夹具设计和焊接工艺设计。而正确地设计、选用各种工装夹具，可以缩短装配、焊接时间，减少工人的劳动强度，提高劳动生产率，保证产品的装配精度和焊接质量，还可以充分发挥焊接设备的潜力，扩大其使用范围，并有利于实现焊接作业的综合机械化和自动化。焊接夹具是焊接工艺能否顺利、正确执行的保证，而工艺过程是否合理也影响夹具的设计和使用效果。所以兼顾工装夹具和焊接工艺，设计出合理的夹具及工艺，是很重要的。 本课题通过对产品材料的焊接性分析以及焊接工艺性分析，选择出合理的焊接方法与焊接工艺参数，并制定可行的焊接工艺方案，同时优化出较好的焊接工装夹具。最后，绘制出工装夹具的装配图与零件图，详细具体地阐述摩托车车架头部的焊接加工过程。 关键字：摩托车，车架头部，焊接，夹具设计 精品 ABSTRACT This paper mainly presents fixture design and welding technology design of the head of the motorcycle frame welding. Proper design and selection of various fixture can not only shorten the assembly and welding time, reduce labor intensity of workers, raising labor productivity, and ensure accuracy of product assembly and welding quality, but also can give full play to the potential of welding equipment, expand the scope of its application, and will be conducive to the realization of the comprehensive mechanization and automation. Welding fixture is the guarantee of the smooth and correct implementation of welding process. Moreover, the process whether it is reasonable also affects the design and effect of the use of fixture. So in the view of fixture and welding technology, it is very important to design a reasonable fixture and welding technology. The subject by the welding material analysis and welding process analysis of product, to choice a reasonable selection of welding methods and the welding process parameters, and develop practical welding technology scheme. At the same time，the subject presents the fixture design. Finally, drawn the assembly drawing and part drawings of the fixture, given a detailed account of the head of the motorcycle frame welding process. Keywords： Motorcycle, Head of the f