电机圆筒外壳模具设计（毕业学术论文设计）.docVIP

摘要 PAGE PAGE II 摘 要 随着计算机技术和数值计算技术的发展完善，计算机在铸造领域得到了广泛的研究和应用。它可以在不进行实际浇注的情况下，模拟铸造的充型、凝固、传热、应力场、微观组织分布、缩孔及缩松的形成等过程，可以大大提高生产效率和经济效益，对于铸造生产具有十分重要的意义。 本论文中，首先用高级绘图软件UG实现电机圆筒外壳的三维实体造型，并导出*.stl格式的文件；然后利用数值模拟软件AnyCasting，对其进行一系列的参数设置，选择优化的网格剖分数量，完成对铸件的前处理后，开始模拟电机外壳铸造的整个过程。最后输出结果并对其分析。本文着重分析了充型、凝固过程，及其速度场、温度场的变化情况。主要结论如下： （1）利用高级绘图软件对三维实体造型的设计，这是数值模拟的前期准备阶段。绘制的准确与否，直接影响到后期的模拟结果。 （2）Anycasting软件对铸件的充型、凝固过程数值模拟能比较准确地反映铸件的实际状况，预测可能产生的铸造缺陷及产生缺陷的部位。 （3）对电机圆筒外壳铸件解剖和宏观观察，结果显示边缘处尚存在一定程度的缩孔，缩松缺陷，但缺陷较少，说明这个设计工艺较为合理。 关键词：三维实体造型，数值模拟，充型 Abstract Abstract Abstract With the development of the computing technology and the numerical calculating technology, the compute was applied to the casting field more and more. The numerical simulation technology can simulate the forming process of mold filling, the solidification, the conduct heat, the stress field, the distribution of micro-organization and the shrinkage cavity and so on in the casting without experiencing practical molding, and improve greatly the yield efficiency and economic benefits. Therefore, the compute technology has become important meanings in casting production. In this thesis, firstly, the three-dimensional solid modeling of motor shell should be achieved by the advanced graphics software UG and then export it the *.stl file format. Secondly, carry out a series of parameter settings and select the optimal number of mesh using software Anycasting. Thirdly, after completion of the pre-casting, this paper starts to investigate the whole simulative process of casting. Besides the numerical simulation of the filling and solidification process, the paper investigates the changing of the velocity field and temperature field. The main research work and conclusions are presented as follows. 1. The three-dimensional solid modeling of motor shell should be achieved by the advanced graphics software UG which is the pre-preparation phase of the numerical simulation. The accuracy of the molding directly impact on the results of si