聚丙烯(PP)水杯注塑模设计（毕业学术论文设计）.docVIP

w 聚丙烯（PP）水杯注塑模设计 摘 要：本文对水杯的技术要求和工艺结构进行了分析，确定了工艺方案及模具形式。而且对水杯进行了相关数据的分析与计算, 根据分析结果选注塑机和注塑工艺，从而确定聚丙烯水杯设计思路及方案，最后在设计过程中运用Pro/E、Auto CAD软件进行注塑模结构设计与计算并绘制出模具总装图以及部分非标准图形。从而得出完整的理论设计结果,为今后工程设计打下了基础。 关键词：聚丙烯水杯，塑模，设计, 型芯, 型腔 Design of Injection Mold of Polypropylene Cup Abstract: This paper analyzes the technological requirements and the technical structures of polypropylene cup to determine the technical solution and the mold styles. This paper also analyzes and calculates the relevant data of the cup, and whereupon selects the injection machine and injection technique, determines the design idea, makes the general drawing of mold, and some non-standard drawings with Pro/E and AutoCAD, to obtain the final theoretical design. The design lays a foundation for future design. Key words: polypropylene cup, plastic mold, design, core, cavity 目 录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc168459052 1. 聚丙烯（PP）水杯的工艺分析 PAGEREF _Toc168459052 \h 2 HYPERLINK \l _Toc168459053 1.1. 塑件的工艺性分析 PAGEREF _Toc168459053 \h 2 HYPERLINK \l _Toc168459054 1.2. 收缩率 PAGEREF _Toc168459054 \h 3 HYPERLINK \l _Toc168459055 1.3. 塑件壁厚 PAGEREF _Toc168459055 \h 3 HYPERLINK \l _Toc168459056 1.4. 塑件尺寸精度和表面粗糙度 PAGEREF _Toc168459056 \h 4 HYPERLINK \l _Toc168459057 1.5. 脱模斜度 PAGEREF _Toc168459057 \h 4 HYPERLINK \l _Toc168459058 2. 注塑机的选用 PAGEREF _Toc168459058 \h 5 HYPERLINK \l _Toc168459059 2.1. 喷嘴尺寸 PAGEREF _Toc168459059 \h 6 HYPERLINK \l _Toc168459060 2.2. 定位环尺寸 PAGEREF _Toc168459060 \h 6 HYPERLINK \l _Toc168459061 2.3. 模具厚度 PAGEREF _Toc168459061 \h 7 HYPERLINK \l _Toc168459062 2.4. 模具的长度与宽度 PAGEREF _Toc168459062 \h 7 HYPERLINK \l _Toc168459063 3. 注射模设计步骤 PAGEREF _Toc168459063 \h 8 HYPERLINK \l _Toc168459064 3.1. 塑件成型方案的确定 PAGEREF _Toc168459064 \h 8 HYPERLINK \l _Toc168459065 3.2. 型腔数目的确定 PAGEREF _Toc168459065 \h 8 HYPERLINK \l _Toc168459066 3.3. 成型零部件的设计计算 PAGEREF _Toc168459066 \h 9 HYPERLINK \l _Toc168459067 3.4. 浇注系统设计 PAGEREF _Toc168459067 \h 12 HYPERLINK \l _Toc168459068 3