机械设计制造及其自动化外文文献翻译-加工基础（适用于外文翻译+中英文对照）（毕业学术论文设计）.doc

w PAGE 模板1： 2009届 　　　　　　　　　　　　　　　　　 本科毕业论文外文文献翻译 The Introduction of Machining 加工基础 姓 名　 　　　 　　　　　 　　　　　　 学 号　　　200515330103 　　　　　　　年 级　 2005 　　　 　　　　　　　专 业　 机械设计制造及其自动化 　　　　　　　系　（院）　　　工程学院 　　　　　　　指导教师　 2009年 3月 15日 Abstract Machining process is a process generated shape, in this process, Drivers device on the workpiece material to be in the form of chip removal. Although in some occasions, the workpiece under no circumstances, the use of mobile equipment to the processing, However, the majority of the machining is not only supporting the workpiece also supporting tools and equipment to complete. Keyword: introduction; machining The Introduction of Machining Have a shape as a processing method, all machining process for the production of the most commonly used and most important method. Machining process is a process generated shape, in this process, Drivers device on the workpiece material to be in the form of chip removal. Although in some occasions, the workpiece under no circumstances, the use of mobile equipment to the processing, However, the majority of the machining is not only supporting the workpiece also supporting tools and equipment to complete. Machining know the process has two aspects. Small group of low-cost production. For casting, forging and machining pressure, every production of a specific shape of the workpiece, even a spare parts, almost have to spend the high cost of processing. Welding to rely on the shape of the structure, to a large extent, depend on effective in the form of raw materials. In general, through the use of expensive equipment and without special processing conditions, can be almost any type of raw materials, mechanical processing to convert the raw materials processed into the arbitrary shape of the structure, as long as the external dimensions large enough, it is possible. Because of a productio