产品说明-一、产品说明ⅰ.docVIP

一、产品说明: Ⅰ.Product description: 压缩空气中含有较多的尘埃，金属磨损污垢，凝结水，润滑剂,酸性冷凝液,油雾以及碳氢化合物等,如果不将这些有害物质除去,则将导致自动化设备故障,仪器、仪表失灵，工艺污染导致产品品质下降，甚至废品等，严重影响生产运行。而造成经济上的重损失。因此，选择效率高，压损小的压缩空气过滤器是解决这类问题最为经济而有效的方法。 Since there is too much dust, worn metal dirt, condensed water, lubricant, acid condensing liquid, oil fog as well as hydrocarbon, it will result in the automation equipments, instruments and meters unable to work and decreased product quality as well as rejects cased by process pollution if these hazardous substances are not removed, thus greatly influencing the production and operation and causing great economic loss. Therefore, to choose a compressed air filter with high efficiency and small pressure loss is an economic and effective method to solve such kind of problems. TQ系列压缩空气过滤器，采用进口高效分离滤料和专用海绵等材料制作各种规格和精度等级的滤芯，外壳采用优质铝合金和碳钢材料，运用先进工艺加工，静电喷涂环氧树脂粉末，光亮平整的外观，等效替代进口听滤芯的性能，完善而又可靠的附件功能，经过多年的实践应用，在众多的关键场合，完全代替了进口产品，适应了各类场合压缩空气净化处理的各项要求。 With filter elements of various specifications and precisions produced by imported highly efficient separation filter feed as well as special sponge and a housing of high-quality and carbon steel material, TQ series compressed air filters are manufactured with an advanced technology, with a polish and smooth appearance that is under static painting of epoxy resin powder and equally replaces the performance of imported filter element. With complete and reliable accessory functions, and after many years of practice and application, it has replaced the imported products in many critical areas and met requirements for compressed air purification in various applications. 二、结构原理: Ⅱ.Structural principle: 精密过滤由于滤壳结构不同分法兰式和压盖式两种基本形式，上游压缩空气经进气口和滤芯上盖通气孔进入滤芯，由于滤芯由多层不同作用的过滤材料构成，压缩空气通过拦截，惯性、重力、扩散及吸附等效应，使其中的水汽，尘埃，油雾化学异味物质被阻隔截留，纯净的压缩空气通过滤芯从滤壳腔体的出气通道进入下游，源源不断供应气动装置使用，被截留的水分，油雾、尘埃等有害物质被收集在滤壳底部，达到一定容量后由自动排水器自动打开阀门使之排出机外。 Based on the difference in filter shell structure, the precision filter consists of two basic types-flange and cover models. The compressed air