日本瑞恩PC-PSC系列可编程伺服控制装置说明书英文.pdf

PC-PSC Control Card PCDI-2/PCDI-2A for PC-Based Programmable Servo Control System Hardware Reference, Installation and Troubleshooting Engineering Manual 23613-3E Reliance Electric Limited The information in this instruction manual is subject to change without notice. Reliance Electric assumes no responsibility for errors that may appear in this manual. Throughout this manual, the following notes are used to alert you to safety considerations: ATTENTION: Identifies information about practices or circumstances that can lead to personal ! injury or death, property damage, or economic loss. Important: Identifies information that is critical for successful application and understanding of the product. ATTENTION: Only qualified electrical personnel familiar with the construction and operation of ! this equipment and the hazards involved as well as the applicable codes and standards should install, adjust, operate, or service this equipment. Read and understand this instruction manual and other applicable manuals in their entirety before proceeding. Failure to observe this precaution may result in bodily injury. ATTENTION: Installing and removing the PC-PSC Control Card PCDI-2/PCDI-2A or its connecting cables may result in unexpected machine operation. Power to the machine should be turned off before installing or removing the card or its connecting cables. Failure to observe this precaution may result in bodily injury. ATTENTION: The user is responsible for conforming with all applicable local, national and international codes. Failure to observe this precaution may result in damage to, or destruction of the equipment. ATTENTION: The PC-PSC Control Card PCDI-2/P