EM-5700N操作手册(english)20060720版.doc

　 FILENAME EM-5700N Work Menu 　 　- ELITE AUTOMATIC CO., LTD. EM-5700N PCB SEPARATOR CUT MACHINE Machine Operation Handbook 億立自動化股份有限公司 ELITE AUTOMATIC CO., LTD. 台北縣樹林市俊德街14號 NO. 14, JIUNN THE ST., SHU-LIN CITY, TAIPEI HSIEN, ?02-2688-2934 ?02-2688-2938 ?elitego@ms17.hinet.net Table of Content General Spec and Model Description 03 Turn on and turn off 04 Programming description 05 Open a work file 06 Program origin and Z-axis compensation 07 Teach: cutting points 08 Teach: idle run 09 Add a point 10 Point modification 11 Delete multiple points 16 Program backup 17 Modify multiple points 18 Matrix copy 19 Rotation Copy 20 Gap Compensation 21 Manual Positioning 22 Machine Parameter Setting（for trained technicians only） 23 ONE、MO modification 24 TWO、M1m 25 Auto Cutter compensation（for trained technicians only） 30 ID / password（for trained technicians only） 26 Machine parameter modification（for trained technicians only） 27 I/O test screen description 28 Auto Vision operation 29 Cutter change 31 Main axis controller（for trained technicians only） 32 Data category （for trained technicians only） 33 System program update （for trained technicians only） 34 RS-232 connection setting（for trained technicians only） 39 Error messages 42 Servo driver and controller run time error 43 Machine maintenance 44 Vision auto positioning 45 EM-5700N-AT appendix 46 EM-5700N PCB SPARATOR CUT MACHINE Basic Specification 01. X、Ycutting speed：0~100mm/s 02. Repeatability：± 0.01mm 03. X、Y、Z control：IPC and PC 04. X、Y、Z motion：AC servo motor 05. Interface and data storage：PC system 06. Cutting accuracy：± 0.1mm 07. Turning speed：MAX40000rpm 08. Voltage requirement ：220V 1ψ 50 / 60HZ 09. Air pressure：4.5kg/cm2 min. 10. Power consumption：3KVA 11. Dust collection：lower suction 12. Vacuum voltage：220V (380V) 3ψ 13. Upper vacuum dimension：500*500*1000mm 14. Lower vacuum dimension：665*635*1610mm Model number description Ty