毕业论文设计《基于solidworks的旋塞阀模拟仿真》.docVIP

PAGE 摘 要 本文较为全面的探究了模拟仿真的概念，关键技术和其应用领域，同时也探究了旋塞阀的模拟仿真过程。详细的分析了旋塞阀的工作原理和各个零件，完成了旋塞阀中阀体，锥形塞，压盖的三维实体建模和实体零件装配以及利用Animator插件对旋塞阀的爆炸演示和模拟仿真。 关键词：模拟仿真,旋塞阀 ,SolidWorks软件 The analog simulation of the Stopcock based on the Solidworks software Abstract This article does not explores a more comprehensive concept of simulation, the key technology and its applications, but also explores the simulation of the process of plug valves.It also dtails analysis of the stopcock of the working principle and the various parts of the completion of a stopcock valve, cone-shaped plug, cap the three-dimensional solid modeling and assembly as well as physical parts of the stopcock plug-Animator explosion demonstration and simulation . Keywords: Simulation ,Stopcock ,Solidworks 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc230954889 1 绪论 PAGEREF _Toc230954889 \h 2 HYPERLINK \l _Toc230954890 2 模拟仿真技术的概述 PAGEREF _Toc230954890 \h 2 HYPERLINK \l _Toc230954891 2.1 模拟仿真技术的概念 PAGEREF _Toc230954891 \h 2 HYPERLINK \l _Toc230954892 2.2 模拟仿真技术的关键技术 PAGEREF _Toc230954892 \h 3 HYPERLINK \l _Toc230954893 2.3 模拟仿真技术的应用领域 PAGEREF _Toc230954893 \h 3 HYPERLINK \l _Toc230954894 3 SolidWorks的概述 PAGEREF _Toc230954894 \h 4 HYPERLINK \l _Toc230954895 4 基于SolidWorks的旋塞阀的模拟设计实例 PAGEREF _Toc230954895 \h 4 HYPERLINK \l _Toc230954896 4.1 旋塞阀的三维实体建模的过程 PAGEREF _Toc230954896 \h 4 HYPERLINK \l _Toc230954897 4.1.1 压盖的三维实体建模过程 PAGEREF _Toc230954897 \h 4 HYPERLINK \l _Toc230954898 4.1.2锥形塞的三维实体建模过程 PAGEREF _Toc230954898 \h 7 HYPERLINK \l _Toc230954899 4.1.3　阀体的三维实体建模过程 PAGEREF _Toc230954899 \h 7 HYPERLINK \l _Toc230954900 4.2 旋塞阀装配体的装配 PAGEREF _Toc230954900 \h 7 HYPERLINK \l _Toc230954901 装配方法如下： PAGEREF _Toc230954901 \h 7 HYPERLINK \l _Toc230954902 4.3 旋塞阀的动画演示的生成 PAGEREF _Toc230954902 \h 7 HYPERLINK \l _Toc230954903 4.3.1旋塞阀爆炸图和解除爆炸图的生成过程 PAGEREF _Toc230954903 \h 7 HYPERLINK \l _Toc230954904 4.3.2 旋塞阀的模拟图生成过程 PAGEREF _Toc230954904 \h 7 HYPERLINK \l _Toc230954905 旋塞